Reset Password

USD 0 to USD 10,000

Steam YouTube Videos

Showing 1-10 of 10 results
Acorn to Arabella – Journey of a Wooden Boat – Episode 92: Steaming Planks
Acorn To Arabella
Acorn to Arabella – Journey of a Wooden Boat – Episode 92: Steaming Planks
In the last episode, we broke a plank. No big deal though, as with everything we've come up on in the project, the key is just finding a way forward. So we cut the broken end off of the plank and figured out a way to rig it so that we could steam the en...
Firing Up a Steam Engine Tug Boat! | ⛵ Sailing Britaly ⛵
Sailing Britaly
Firing Up a Steam Engine Tug Boat! | ⛵ Sailing Britaly ⛵
It's not every day you get the chance to fire up a coal-fired steam engine! I filmed the whole process, from the striking of a single match, to 40 tons of tug boat underway. 🔔 SUBSCRIBE (It's Free!) ➜ http://bit.ly/SBYouTube⛵ A big thank you to Der...
Acorn to Arabella – Journey of a Wooden Boat – Episode 76: Pocketless Frame Installation
Acorn To Arabella
Acorn to Arabella – Journey of a Wooden Boat – Episode 76: Pocketless Frame Installation
One of the great parts of boatbuilding (or maybe the hardest part about learning boatbuilding?!) is that there are many different ways to do things. And they are all correct! Steaming in Arabella's frames is a good example of this. All her framing so far...
Acorn to Arabella – Journey of a Wooden Boat – Episode 61: Tacking Floors and Steaming Frames
Acorn To Arabella
Acorn to Arabella – Journey of a Wooden Boat – Episode 61: Tacking Floors and Steaming Frames
We're moving right along with our silicon bronze floor timbers. We tacked most of the floor pieces together in preparation for welding them in batches. Before we can finish making the rest of the floor timbers though, we need to replace the frames that w...
Acorn to Arabella – Journey of a Wooden Boat – Episode 52: Cutting the Aft Rabbet
Acorn To Arabella
Acorn to Arabella – Journey of a Wooden Boat – Episode 52: Cutting the Aft Rabbet
As we steam in Arabella's frames we have now reached the aft section of the build and need to cut the rabbet up the sides of the stern posts to determine where our frame sockets should land. Once cut we spend a day steaming in frames with a couple snags a...
Acorn to Arabella – Journey of a Wooden Boat – Episode 47: Steaming Frames: In Depth
Acorn To Arabella
Acorn to Arabella – Journey of a Wooden Boat – Episode 47: Steaming Frames: In Depth
In the last video we showed a bit of the process for steaming in Arabella's frames but it's such an important part of the build that we wanted to do a full video talking about the intricacies of this part of the build. From selecting lumber to our steam b...
Acorn to Arabella – Journey of a Wooden Boat – Episode 46: Steaming Frames
Acorn To Arabella
Acorn to Arabella – Journey of a Wooden Boat – Episode 46: Steaming Frames
We had a lot to do in order to get ready for the steaming of the frames. We cut the frame sockets as well as milled up all the framing stock, and just in time. By the end of the weekend we had 26 of the 74 frames steamed in place. ----------------------...
Acorn to Arabella – Journey of a Wooden Boat – Episode 44: Putting Up the Molds
Acorn To Arabella
Acorn to Arabella – Journey of a Wooden Boat – Episode 44: Putting Up the Molds
Need an explanation of bent frame construction? Here's the first part. We've been working fast now and after assembling the backbone, it was time to install the molds. Which proved to be a bit more challenging than expected in our boathouse. We will be ...
The Bittern and the bridge
Adventures of an old Seadog
The Bittern and the bridge
Short film about the steam engine Bittern. Built in the 30's,she crosses for the first time into cornwall over the Royal Albert bridge.
Crescent Lake
The O'Kelly's
Crescent Lake
A meditative start to a beautiful day at Crescent Lake, near Rockaway Beach on the Oregon coast. Cool dewdrops on lakeside leaves twinkle as the air starts to warm. The sun peaks over the coast range hills, and trees light up with the first light.