Watch Sailing & Boating Adventures Around the World tagged “Stainless steel”
Explore sailing, boating, and water sports through our curated video archive. From epic sea voyages to serene diving escapes, discover unforgettable adventures from top YouTube creators. Start your journey. Dream big. Sail far.
Showing 1-24 of 42 results
We Fixed a Major Issue on Our Catamaran! 🛠️⚓ #boatrefit #catamaran #sailingNewZealand
Cracked welds near the helm? Not something you want to mess with... We've finally tackled this critical repair on our Lagoon 42 sailing catamaran here in New Zealand! Reinforced and ready for safer sailing — this is just the beginning of our full refit s...
No Sexual Innuendo Here Ep182 Edited
Getting on hands and knees, climbing the pole, poetry, CQR anchor, fish chasing dolphin, and dancing. It’s time for sprucing up Isabella. All hands on deck as Karen gets on her hands and knees to wash the deck clean. The wind generator pole is made of 3...
No Sexual Innuendo Here Ep182
Getting on hands and knees, climbing the pole, poetry, CQR anchor, fish chasing dolphin, and dancing. It’s time for sprucing up Isabella. All hands on deck as Karen gets on her hands and knees to wash the deck clean. The wind generator pole is made of 3...
Boat Hardware installation started. Shiny bits on! – S03E27
In this episode we start installing the stainless steel helm and play a bit with the steering cables, we do the unboxing of the dusty anchor winch and install it in place, we do a mock-up of the anchor rollers alignment and we mount a cleat! Feels good to ...
LAST SANDING & SPOT FILLING. Is it THE END?- S03E15 – Building Wilda | Catamaran Restoration | Refit
In this episode of Building Wilda, we resume the sanding & spot filling activities in the salon, galley and the middle room on the port side. This is the last area that is about to receive its share of shiny top coat. But first we have to identify and ...
Learning to Weld BEASTY Chainplates In Stainless Steel | Wildling Sailing
It was always something that daunted me, but with the help of my Dad and Uncle I can now see that welding is not too difficult, it just needs practice. Now to weld some important things for my project Wharram Pahi 42 Catamaran Project! My Instagram: @boat...
HOW TO GET AFFORDABLE UPGRADES FOR YOUR BOAT! EP-96
SAILBOAT UPGRADES IN TUNISIA, NEW EXTERIOR CANVAS WORK WITH SUNBRELLA PLUS MATERIAL INCLUDING CUSHIONS, SPRAYHOOD, BIMNEY, LAZY BAG AND ACCESSORIES, NEW STAINLESS STEEL SOLAR ARCH AND DINGHY DAVITS, PROCESS OF BUYING YOUR OWN CANVAS MATERIALS & HARDWAR...
Ep 328 | Shortening the Furler Foil and Making Nutshell Super Safe! Sailing Nutshell, Darwin
Magnus decides to reduce the length of the headsail furler foil to prevent it from getting caught up in one of the halyards in the future, and jamming up the system. So we remove the furler and begin the task of shortening it, replacing the rivets and bolt...
Handrails installation – Part II – S02 E24 or Why strong tape is still important
Last week, Axel had a first attempt to making a fiberglass tube for the handrails stanchions. That didn’t go well, so, in this episode we try again, hopefully with a more successful result. We also share the steps we take for the handrails installation. ...
Ep 274 | Big Pantry Makeover and New Stainless Lifelines, Darwin, Sailing Nutshell
Wendy empties the pantry yet again and it’s time to begin planning for new shelves to make things store more easily. Magnus cuts the timber, Wendy paints it all and then Magnus fits the new shelves. Magnus replaces all of the lifelines in Nutshell’s ...
Ep 272 | New Bimini, Huge Canning Session, Darwin, Sailing Nutshell
We build a new bimini for Nutshell. We are constrained by the shrouds and the mizzen mast, so it’s quite difficult to work out where to put it, but we get there in the end. Magnus cleans the stainless steel on the bowsprit with a miraculous concoction. ...
WE NEED A BIGGER HAMMER//Presents From The Other Side Of The World-Episode 57
This week we are popping out the second part from our hull mold and getting a very exciting shipment from the other side of the world! Want to support us? Here's a couple ways you can: Like, Follow, and Share! facebook: https://facebook.com/svdauntless/...
Ep 225 | Learning to TIG Weld and Nutshell Repairs, Nutshell Workshop, Austraiia
Magnus is planning on making the davits for Peanut and our dear friend, Bryan, is a welder so he shows Magnus the ropes. Magnus begins the repair on the lid of the front gas locker from Nutshell. The lid is very old and badly decayed so he goes about buil...
POWER SERIES PART 1: SOLAR POWER AND INSTALL//Solar Array On A Sailboat-Episode 10
Solar is a hot commodity and we are taking full advantage of this free resource! We fabricated our support structure ourselves as well as installed everything on our own. This video gives you a bird's eye view of how we built this crazy big array. If you w...
SALVAGING STAINLESS STEEL off a SUNKEN WRECK – Episode 29
In this episode we free dive on a sunken sailboat which had been abandoned in the bay. Efforts had been made for the last 2 years to contact the owner to ask him to remove it, to no avail. It was therefore deemed abandoned, and although not worth salvaging...
18-12_Ultra vs. Rocna Anchor – what is the best anchor (sailing ZERO)
Ahoy, in this episode we talk about anchors. We tested the ULTRA Anchor in comparison to the ROCNA Anchor. With both anchors we did exactly the same maneuvers to compare their performance. First we anchored like we do all the time, backing up to set the a...
HOW TO: Polish your STAINLESS STEEL! (BEST RESULTS)
Ricky walks you through to steps of getting your grimy old oxidized stainless steel looking brand spanking new again! What you need: Grinder: https://amzn.to/44oGu5M Unitized Discs: https://www.3m.com/3M/en_US/p/?Ntt=unitized+wheel Polishing Wheel: https...
Just About Sailing February 2018 – Fixing the Rudder, Pt 2 Figuring out what to do
This is quite literally the 'middle' video. It's all about the stuff that is going into the middle of the rudder. As Expanding Epoxy Foam is new to me, I felt I wanted to do some experiments and get to know it as a material. Doing this has also helped m...
Sail Life – The Faroe Islands, a short break from sailboat restoration – DIY sailboat refit
I take a short break from my DIY sailboat restoration. For the last four years, I've been subscribed to a YouTube channel called DrakeParagon. This weekend I finally got the chance to meet Drake and Mo in person. Drake and Mo's channel: https://www.youtub...
Sail Life – Rotten deck core on a Warrior 38 – DIY sailboat restoration
In this video, I remove part of the deck aboard my Warrior 38 sailboat to reveal a completely rotten core. That's okay, DIY sailboat restoration is a lot of fun!
Sail Life – Removing the old teak deck & issues with the deck – DIY sailboat refit
In this video, I remove the old teak deck aboard my 38 ft sailboat (Athena). Turns out there are a few issues with the deck that I'll need to fix. *** Links *** Sail Life on Patreon: http://bit.ly/SailLifeOnPatreon Sail Life on Facebook: http://bit.ly/Sa...
Sail Life – Going inside & removing deck hardware – DIY sailboat refit
In this video, Athena (my 38 ft sailboat) moves into a shed and I get started removing deck hardware. But that's not all! Obelix (my 30 ft sailboat) now has a working engine again :D *** Links *** Sail Life on Patreon: http://bit.ly/SailLifeOnPatreon Sa...
Sail Life – Killing time (insulating), preparing to remove the teak deck – DIY sailboat restoration
Insulating a locker aboard my sailboat Athena. Next week (fingers crossed) Athena is going to get moved indoors. That means I can finally get busy removing the teak deck! Roger's blog: http://www.agentlemansyacht.com/ *** Links *** Sail Life on Patreon:...
Something AWESOME is coming!
Be the FIRST to know⛵
Sign up for exclusive updates and be the first to hear when we go live!
Get sneak peeks, exciting announcement, and special content straight to your inbox!
We don’t spam! Read our privacy policy for more info.