Reset Password

USD 0 to USD 10,000

Saildrive seal replacement YouTube Videos

Showing 1-5 of 5 results
⛵ 5 Years Later: Saildrive Seal… #sailing #sailboat #shorts
Sailing Britaly
⛵ 5 Years Later: Saildrive Seal… #sailing #sailboat #shorts
5 years ago we replaced our saildrive diaphragm seal. Full video ➜ https://youtu.be/o_Bv7_tAOY4 We used CT1 sealant to secure the gaiter / boot between the saildrive and the hull. People have asked how the sealant has lasted (these seals often come loose...
SAILDRIVE UPGRADE KIT fixes more than one problem! – Episode 48
Sailing Parlay Revival
SAILDRIVE UPGRADE KIT fixes more than one problem! – Episode 48
In this episode we show how we upgraded our SD50 sail drives on our Lagoon 450 to alleviate the problem of the slipping cone clutch, which is an extremely common issue with these saildrives. Also, on our way into Rio Dulce, Guatemala, the sail drive develo...
Sail Drive ENGINE BED INSTALL! | VETUS | YACHT REBUILD WEEK 90
Sailing Lady Africa
Sail Drive ENGINE BED INSTALL! | VETUS | YACHT REBUILD WEEK 90
(Ep.100) Wow, can you believe we're on episode 100 already!! Que the celebration for when we are in the water! ;) So this week we got all our goodies from Vetus in the previous episode we set out to start installing it which meant grinding down inside our...
Saildrive Diaphragm Replacement | ⛵ Sailing Britaly ⛵ [Boat Work]
Sailing Britaly
Saildrive Diaphragm Replacement | ⛵ Sailing Britaly ⛵ [Boat Work]
SUBSCRIBE ➜ http://bit.ly/SBYouTube⛵ Informative Sailing Videos! In this "Boat Work" video I replace the 26-year-old saildrive diaphragm seal on our boat. I disconnect the saildrive from the engine, move the engine forward, then remove the saildrive as...
There’s a big hole in our Boat… | ⛵ Sailing Britaly ⛵
Sailing Britaly
There’s a big hole in our Boat… | ⛵ Sailing Britaly ⛵
6 days until we launch but wait a minute, there's a big hole in our hull! Better get that sorted then... (Volvo Penta Saildrive Diaphragm Replacement) 🔔 SUBSCRIBE ➜ http://bit.ly/SBYouTube⛵ Today was another good day, but our deadline is approachin...