Reset Password

USD 0 to USD 10,000

Sail life vlog YouTube Videos

Showing 1-15 of 82 results
Sailor Girl Wants Good Times & Tortillas | Sailboat Story 241
Sailboat Story
Sailor Girl Wants Good Times & Tortillas | Sailboat Story 241
We launch the dinghy to explore the Cathedral Caves of Rock Sound. After that, we're hot & sweaty so we jump off a cliff into the Ocean Hole. Then we're hungry to we head to the boat and cook up a batch of tortillas. ~ Ben, Tambi, & Molly | "SAI...
She’s Ready To Sail | Sailboat Story 91
Sailboat Story
She’s Ready To Sail | Sailboat Story 91
Our Endeavour 32 sailboat is ready to sail. In this vlog, we tune the standing rigging with a Loos tension gauge, we get a new spray dodger, and we also discover an impromptu boat project that MUST be completed before we can sail. This was our LAST boat ...
Poli Glow Polishing, Boat Launching & Mast Stepping | Sailboat Story 90
Sailboat Story
Poli Glow Polishing, Boat Launching & Mast Stepping | Sailboat Story 90
BUY A SHIRT: https://www.bonfire.com/animateys/ ************************************************************** FINALLY, after over a year of waiting and working, it's time to splash the boat. The travel-lift raises Sandflea from her stands and slowly r...
Man VS Stuck Oil Filter | Sailboat Story 87
Sailboat Story
Man VS Stuck Oil Filter | Sailboat Story 87
The highlight of this particular video is probably the part where I do battle against a recalcitrant oil filter. For me, it kinda sucked, but for you - I imagine you'll find it somewhat entertaining. Oh - Tambi and Molly make an appearance in this one. Al...
Installing Sta-Lok Rigging Terminals & Bleeding A Lot | Sailboat Story 85
Sailboat Story
Installing Sta-Lok Rigging Terminals & Bleeding A Lot | Sailboat Story 85
In this video I'll be installing Sta-Lok rigging terminals. These are great because they are assembled with simple hand tools instead of requiring a swage press. Replacing the standing rigging on our sailboat is tough. It's hot, mosquitos are everywhere, ...
DIY Sta-Lok Standing Rigging On An Old Sailboat | Sailboat Story 83
Sailboat Story
DIY Sta-Lok Standing Rigging On An Old Sailboat | Sailboat Story 83
It's time to replace the 38 year old standing rigging on our Endeavour 32 sailboat. In this video, I replace the 4 lower shrouds. Those are the wires that run from deck-level, up to the height of the spreaders. Ever since buying this sailboat, I've had t...
Selling & Sailing | A General Update | Sailboat Story 82
Sailboat Story
Selling & Sailing | A General Update | Sailboat Story 82
Things aren't going as easily as we had hoped concerning the sale of our house. It's not really that big of a deal, aside from the fact that it's causing us to miss out on valuable cruising time. This video shares our current day-to-day living as well as ...
Building A Chameleon Sailing Dinghy | Epoxy & Fiberglass – #3
Sailboat Story
Building A Chameleon Sailing Dinghy | Epoxy & Fiberglass – #3
I flip the dinghy over and cover the outside of the hull in a layer of fiberglass cloth and epoxy. It's so cool to see how the cloth disappears as it absorbs the epoxy - this is especially apparent when the footage is sped up, which you'll certainly see -...
Building A Chameleon Sailing Dinghy | Stitch & Glue – #2
Sailboat Story
Building A Chameleon Sailing Dinghy | Stitch & Glue – #2
Part 2 of building a homemade Chameleon Sailing Dinghy from Home Depot plywood and cheap epoxy. I've worked on the boat now for 68 hours. It's hard work, but I keep reminding myself how amazing it's going to be when we're sailing it around various clear-w...
Building A Chameleon Sailing Dinghy | Lofting Plywood – #1
Sailboat Story
Building A Chameleon Sailing Dinghy | Lofting Plywood – #1
I'm building a Chameleon sailing dinghy. It's a sprit rig pram made of plywood and epoxy that will sail, motor, row, and nest. During our last trip to the Bahamas I saw a few rigid dinghies that had small sailing rigs that were cruising around the anchor...
Old Boat Gets A New Water Tank Lid | Sailboat Story 81
Sailboat Story
Old Boat Gets A New Water Tank Lid | Sailboat Story 81
Our Endeavour 32 sailboat gets a new water tank lid to replace the rotten one that was contaminating our drinking water. This project, like all boat projects, took far longer than I thought it would. In the end though, I think the results are worth the e...
New Water Tank Lid For Our Endeavour 32 Sailboat | Sailboat Story 80
Sailboat Story
New Water Tank Lid For Our Endeavour 32 Sailboat | Sailboat Story 80
In this vlog, I'll construct a brand new water tank lid for our Endeavour 32 sailboat. The old was tragically destroyed, by me, with a saw, while gaining access to the interior of the water tank. The old lid was rotten anyways, so it's not really as tragi...
Water Tank Repair On Our Endeavour Sailboat | Sailboat Story 79
Sailboat Story
Water Tank Repair On Our Endeavour Sailboat | Sailboat Story 79
In this vlog, I repair the water tank aboard our Endeavour sailboat. After hurricane Irma, I noticed flakes of weird stuff are floating in our drinking water. SOLUTION: Reseal the inside of our water tank with epoxy. Simple, right? BwAHHahhAhahAhahAHHAA...
SAILBOAT STORY Goes To The Annapolis Sailboat Show + Q&A | Sailboat Story 78
Sailboat Story
SAILBOAT STORY Goes To The Annapolis Sailboat Show + Q&A | Sailboat Story 78
In this vlog we travel to the Annapolis Sailboat Show. We walkthrough boats, talk to fans, and enjoy a relaxing day in our element. This is actually the 2nd time we've been to this boat show. The first time was right before hurricane Mathew back in 2016 -...
Hurricane Irma Damaged Our Standing Rigging | Sailboat Story 77
Sailboat Story
Hurricane Irma Damaged Our Standing Rigging | Sailboat Story 77
Hurricane Irma damaged our Endeavour 32 sailboat. The storm blew our boat against the dock, breaking the standing rigging. The wind was so powerful that it healed the boat over nearly 45 degrees towards the dock - so much that the shrouds were touching th...