Reset Password

USD 0 to USD 10,000

Performance catamaran YouTube Videos

Showing 346-360 of 650 results
What is Fairing Boat Hatches All about? – S02 E27
Building Wilda
What is Fairing Boat Hatches All about? – S02 E27
As you probably noticed in last week’s episode, we started making some progress on Wilda’s hatches. They’re being sanded and faired :) today we continue working on those beautiful deck hatches as they need more work. As usual, one round of sanding an...
TotalBoat vs Awl Grip…We Switched Primers – And We Can TELL!! (MJ Sailing – Ep 278)
MJ Sailing
TotalBoat vs Awl Grip…We Switched Primers – And We Can TELL!! (MJ Sailing – Ep 278)
Because of supply issues, we had to switch our high build primer...and our results were not what we were hoping for. After months and months of fairing, we have some very exciting footage to bring you, and that is because we are on to our next section of...
Finally getting some help! We get to work on details! – S02 E26 Sailing Catamaran Boat Progress!
Building Wilda
Finally getting some help! We get to work on details! – S02 E26 Sailing Catamaran Boat Progress!
Hi everyone! In this episode we continue fairing and sanding the stanchions in preparation for a round of primer, so as to bring them to the same level of progress as the rest of the boat. We also remember that Wilda has another 10 stanchions on the deck ...
Handrails installation –  Part III – S02 E25 or How Stanchions Reinforcement is Trending Now
Building Wilda
Handrails installation – Part III – S02 E25 or How Stanchions Reinforcement is Trending Now
Last week we temporarily glued the stanchions for Wilda's handrails in order to make sure we found the correct position for them. Once we were happy with that, we made the proper epoxy mix and glued the stanchions for the handrails to the deck. Today we wi...
Lifting Our 7,000 lb Catamaran By Ourselves!! – Changing Our Base to Foam (MJ Sailing – Ep 285)
MJ Sailing
Lifting Our 7,000 lb Catamaran By Ourselves!! – Changing Our Base to Foam (MJ Sailing – Ep 285)
Can we lift up this beast of a boat with just the two of us? For the past two years of the build, our boat has been sitting on the forms which came with the kit from Vietnam. But this week, we lift up the catamaran to switch our our plywood forms for foa...
Preparing to SAIL ACROSS the PACIFIC OCEAN – We lost our MAIN HALYARD! | Harbors Unknown Ep. 99
Harbors Unknown
Preparing to SAIL ACROSS the PACIFIC OCEAN – We lost our MAIN HALYARD! | Harbors Unknown Ep. 99
Go to our sponsor https://betterhelp.com/harborsunknown for 10% off your first month of therapy with BetterHelp and get matched with a therapist who will listen and help. ##sailingadventure #mainhalyard #mousingline Did you see part 1 of Preparing Our P...
“From Concern to Confidence: Conquering the Challenges of Catamaran Electrical Installation” Ep270
Life On The Hulls
“From Concern to Confidence: Conquering the Challenges of Catamaran Electrical Installation” Ep270
Since starting the building of this Catamaran I always had a deep concern about the electrical installation and how we could possibly accomplish it. I could never have imagined a system that has become so complex but am beginning to understand it and bette...
Handrails installation – Part II – S02 E24 or Why strong tape is still important
Building Wilda
Handrails installation – Part II – S02 E24 or Why strong tape is still important
Last week, Axel had a first attempt to making a fiberglass tube for the handrails stanchions. That didn’t go well, so, in this episode we try again, hopefully with a more successful result. We also share the steps we take for the handrails installation. ...
At Least We’re Not Sanding!! (Because We’re Vacuum Bagging) MJ Sailing – Ep 284
MJ Sailing
At Least We’re Not Sanding!! (Because We’re Vacuum Bagging) MJ Sailing – Ep 284
The first 1,000 people to use the link will get a 1 month free trial of Skillshare https://skl.sh/mjsailing05231 Hooray, we've put the sanders down!! For a few days anyway. Now that we're in that sweet spot of temperature, we can get to vacuum bagging s...
Handrails installation – Part I – S02 E23 or How NOT to make fiberglass tube
Building Wilda
Handrails installation – Part I – S02 E23 or How NOT to make fiberglass tube
In this episode we will continue the journey and will show you how we made and installed Wilda’s handrails (or the start of this project :) Before we left to Europe, we took a few measurements of the aft of Wilda planning for handrails. While we were aw...
We Brought On Help – But Will They Stay?? (MJ Sailing – Ep 282)
MJ Sailing
We Brought On Help – But Will They Stay?? (MJ Sailing – Ep 282)
Check out BougeRV and use code MJCIGS15OFF valid until 31st May for all CIGS series or use code MJ15 for 15% off valid until 1st Aug for all products. https://www.bougerv.com/products/200w-flexible-solar-panel https://www.amazon.com/dp/B0BJDHZ561 Watch t...
BREAK from BOATWORK: This was unexpected! – S02 E22
Building Wilda
BREAK from BOATWORK: This was unexpected! – S02 E22
In this week's episode we are taking a much-needed break from boatwork. We had to travel out of Australia as our visas were getting close to expiring, we decided to go back home, we did a few medical check-ups and Axel had a little surprise operation. Actu...
CATAMARAN BUILD – This Could Be A $$ Mistake (MJ Sailing – Ep 281)
MJ Sailing
CATAMARAN BUILD – This Could Be A $$ Mistake (MJ Sailing – Ep 281)
$1,000 of bonding agent in our hands and one chance not to mess this up. Matt and I have been quite busy these past few days (just finished this project yesterday) and using the warm weather at our disposal to break out our methacrylate bonding agent agai...
Did you miss the Sanding party?| DIY Catamaran interior work in progress – S02 E21
Building Wilda
Did you miss the Sanding party?| DIY Catamaran interior work in progress – S02 E21
Hi everyone! As we promised last week, in this episode of Building Wilda we are back in the sanding paradise! Yes, there is a lot of that coming up! And because there is so much to do, we actually got some help from friends, a beautiful Australian family w...
This Could MAKE OR BREAK the Look Of Our Kit Boat (MJ Sailing – Ep 280)
MJ Sailing
This Could MAKE OR BREAK the Look Of Our Kit Boat (MJ Sailing – Ep 280)
It's time for us to begin filling all of those seams which pieced our kit boat together. We're finally back to good 'ol boatwork this week, and it has nothing to do with fairing!! Now that it's getting warm enough to work with products outside of the boa...