Reset Password

USD 0 to USD 10,000

Max prop YouTube Videos

Showing 1-7 of 7 results
is Your Prop Slowing You Down? 🐌 | (Max-prop) Boat Maintenance Ep 340
followtheboat
is Your Prop Slowing You Down? 🐌 | (Max-prop) Boat Maintenance Ep 340
Yes, it's boat maintenance time again! Did you know that fixed props are wrong for sailboats? We have serviced our feathering Max-Prop many times, but this was the first occasion in 17 years that we had it professionally tuned. And you won't believe what w...
BLISTERS?//Did We Find Blisters?-Episode 113
Sailing Dauntless
BLISTERS?//Did We Find Blisters?-Episode 113
Happy Sunday Crew! In this weeks video we find "blisters" in our bottom job, realize we have missing parts on the standing rigging, and try to decide what size anchor we should buy. ⛵️Buy Your MIAMI BOAT SHOW TICKETS Here: https://www.eventspass.com/e...
Removing The Propeller, Shaft, Coupler, Stuffing Box & Cutless Bearing | Sailboat Story 160
Sailboat Story
Removing The Propeller, Shaft, Coupler, Stuffing Box & Cutless Bearing | Sailboat Story 160
The sailboat refit has officially begun and that means that we have to take a lot of things apart before we can start putting it all back together again. We pump contaminated diesel fuel out of the boat, take off the Max Prop, disassemble the shaft coupler...
BOAT MAINTENANCE: Rudder, Cutlass Bearing & Shaft Seal | Monastir, Tunisia | Sailing Sunday  Ep. 112
Sailing Sunday
BOAT MAINTENANCE: Rudder, Cutlass Bearing & Shaft Seal | Monastir, Tunisia | Sailing Sunday Ep. 112
Replacing the Rudder bearing, Cutlass bearing and shaft seal on our Beneteau Oceanis 46 at the boatyard in Tunisia. We also give Sunday a good wash and polish by the boatyard. Join us for a few laughs while we struggle with these dreaded jobs needed on an...
How to dismantle the prop (and service seacocks) – Sailing boat maintenance Ep 242
followtheboat
How to dismantle the prop (and service seacocks) – Sailing boat maintenance Ep 242
Jamie shows how to dismantle the prop when he takes the Max-Prop off the shaft. Liz explains how to check and service seacocks. 00:00 What happens if you find osmosis? 02:14 Status report on removing bottom paint 03:06 To replace our dripless shaft seal w...
Installing Feathering Propellers (In The Water)
Tula's Endless Summer
Installing Feathering Propellers (In The Water)
The props we installed were 15" 3-blade Max-Prop "Easy" from PYI which can be found here http://bit.ly/PYIINCEasyProp New Design available at The Tula Shop - http://tulasendlesssummer.com/shop-tula/ Raw Elements Sunblock - http://bit.ly/RawElementsTula ...
Pulling The Stick, Getting Rigged & A Fresh Bottom (Sailing Curiosity)
Gone with the Wynns
Pulling The Stick, Getting Rigged & A Fresh Bottom (Sailing Curiosity)
It's part one of our Crazy Service "Month". Get all the details here: http://gonewiththewynns.com/stick-rigged-bottom Join our crew on Patreon and become a BIGGER part of the adventure: http://bit.ly/patreon-wynn Subscribe and Keep in touch: http://gonew...