Reset Password

Experience...
Watercraft...
Experience...

USD 0 to USD 10,000

Lathe YouTube Videos

Showing 1-7 of 7 results
Fairing the Mizzen Mast – Episode 157 – Acorn to Arabella: Journey of a Wooden Boat
Acorn To Arabella
Fairing the Mizzen Mast – Episode 157 – Acorn to Arabella: Journey of a Wooden Boat
There is a lot of work going into restoring Victoria's old mast to be our mizzen mast. We already set up a sort of lathe and jig to cut kerfs into the mast so that we can then bring it down to a six inch diameter. To do that, I used a combination of a po...
Apr 09, 2021
Language: EN
Play Time: 00:29:25
Repurposing Victoria’s Mast – Episode 155 – Acorn to Arabella: Journey of a Wooden Boat
Acorn To Arabella
Repurposing Victoria’s Mast – Episode 155 – Acorn to Arabella: Journey of a Wooden Boat
Getting Victoria early in the project was one of the best decisions we have made. There was so much good material packed in that little vessel, and it seems like she just keeps giving every day. From all the beautiful mahogany in her interior, to the bron...
Mar 26, 2021
Language: EN
Play Time: 00:20:17
Victoria’s Mast – Episode 153 – Acorn to Arabella: Journey of a Wooden Boat
Acorn To Arabella
Victoria’s Mast – Episode 153 – Acorn to Arabella: Journey of a Wooden Boat
The bronze floors are done! It's a great feeling complete them and be able to move on to even more tasks that get us closer to launch. Steve keeps on with fitting the main's mast step, and Alix gets to work on figuring out the reuse of Victoria's spars. Yo...
Mar 12, 2021
Language: EN
Play Time: 00:21:43
Salt & Tar: Episode 90-Turning Dead Eyes
Salt & Tar
Salt & Tar: Episode 90-Turning Dead Eyes
Keeping to our salty vision we turn up our dead eyes. We are a gaff rig ketch so we couldn't very well have turnbuckles, we NEED dead eyes. This video spans over a year and two different cameras so, apologies, the sound was difficult to get right on the ep...
Jun 04, 2020
Language: EN
Play Time: 00:23:13
Acorn to Arabella – Journey of a Wooden Boat – Episode 82: Working on Prop Shaft Fittings
Acorn To Arabella
Acorn to Arabella – Journey of a Wooden Boat – Episode 82: Working on Prop Shaft Fittings
We are getting farther up the hull with the planking and as we do so, we are nearing the point at the stern where the propeller shaft will go through. We need to get this hole bored before we plank past it because we are going to need to be able to align ...
Oct 04, 2019
Language: EN
Play Time: 00:22:22
Companionway Lift and more…
SV Seeker
Companionway Lift and more…
Dirtpatcheaven Interview: https://www.youtube.com/watch?v=6S03uWM-iXM&t=334s I question myself when I want to add something that I have never seen on a boat. But this one just makes a lot of sense to me, and lugging the 80 pound welder, and plasma c...
Jan 12, 2017
Language: EN
Play Time: 00:21:37
Cutting Grooves on a Lathe and YouTube Trolls
SV Seeker
Cutting Grooves on a Lathe and YouTube Trolls
Sep 18, 2011
Language: EN
Play Time: 00:06:01