Reset Password

USD 0 to USD 10,000

Kumho YouTube Videos

Showing 1-13 of 13 results
Vlog9 Scrambler/Brat BMW R80/7 Build | Suspension and Subframe
Roaming Rupps
Vlog9 Scrambler/Brat BMW R80/7 Build | Suspension and Subframe
Finished up the back half of the BMW with the new shocks and the fabricated subframe.
Vlog8 Scrambler/Brat BMW R80/7 Build | Tank Prep
Roaming Rupps
Vlog8 Scrambler/Brat BMW R80/7 Build | Tank Prep
Prepped the gas tank for powder coating.
Vlog7 Scrambler/Brat BMW R80/7 Build | Battery tray and rear subframe fabrication
Roaming Rupps
Vlog7 Scrambler/Brat BMW R80/7 Build | Battery tray and rear subframe fabrication
Today I built out a majority of the rear subframe and made a battery tray.
Vlog5 Scrambler/Brat BMW R80/7 Build | Throttle Cables & Ignition Key
Roaming Rupps
Vlog5 Scrambler/Brat BMW R80/7 Build | Throttle Cables & Ignition Key
Today I built a set of custom throttle cables using the Venhill Universal Split Dual Throttle Motorcycle Cable Kit and a NIBBI Universal Aluminum CNC 7/8" Throttle. Overall it was a pretty easy setup, it just took some time.
Vlog4 Scrambler/Brat BMW R80/7 Build | Cleaning and Adjusting the Carbs
Roaming Rupps
Vlog4 Scrambler/Brat BMW R80/7 Build | Cleaning and Adjusting the Carbs
While I wait for more parts to arrive, I took the time to clean and adjust the carbs to get the biking starting easy.
VlogBonus BMW R80/7 Build | Bing Flat Top Diaphragm Replacement
Roaming Rupps
VlogBonus BMW R80/7 Build | Bing Flat Top Diaphragm Replacement
For those of y’all with the Bing Flat Top Carbs, I made a video that will hopefully help you save a little bit of money. You are able to use any BMW BING 32mm carb rebuild kit and work with the supplied diaphragms. All you have to do is use a little heat...
Vlog2 Scrambler/Brat BMW R80/7 Build | Is there proper compression?
Roaming Rupps
Vlog2 Scrambler/Brat BMW R80/7 Build | Is there proper compression?
The correct size battery came in and I am able to check the compression on the high mileage BMW.
Vlog1 Scrambler/Brat BMW R80/7 Build | Wiring and Starter
Roaming Rupps
Vlog1 Scrambler/Brat BMW R80/7 Build | Wiring and Starter
Today I worked on getting 12v through the system and checking to see if I could get the starter engaged. A proper size battery is on order as no one has them in stock in Charlotte.
Scrambler/Brat BMW R80/7 Build | Vlog Intro
Roaming Rupps
Scrambler/Brat BMW R80/7 Build | Vlog Intro
I am in possession of one of my dream bikes, a vintage BMW airhead. This one, in particular, is a 78’ R80/7. Over the next few months, I am going to be getting her back on the road. After that, I’m not quite sure where she’ll end up! She is high mile...
Alfa Romeo Giulietta Diesel – Track Day
Roaming Rupps
Alfa Romeo Giulietta Diesel – Track Day
A bone stock, Giulietta Diesel on the track at the Autodromo di Modena Srl. Just a few laps.
2500 Chevy Suburban Attempt at a Mud Hole
Roaming Rupps
2500 Chevy Suburban Attempt at a Mud Hole
2500 Chevy Suburban attempting the Uwharrie Mud Hole. 33" Mud terrains and G80 locker.
Point of View Review: Kumho AT51
Roaming Rupps
Point of View Review: Kumho AT51
Here is my Point of View Review on a set of Kumho AT51 Tires. In the video the Xterra is all stock drive train except for a 2" Lift. No factory locker just E-LSD (VDC) and 35psi in the tires. Read my Full Review Here: http://www.thenewx.org/forum/70-prod...
Xterra Kumho AT51 Muddy Hill
Roaming Rupps
Xterra Kumho AT51 Muddy Hill
Testing out some Kumho AT51 tires on my 07 Xterra. In the video the Xterra is all stock drive train except for a 2" Lift. No factory locker just E-LSD (VDC) and 35psi in the tires.