Epoxy YouTube Videos
Showing 76-90 of 234 results
S3 #18 DIY boatwork batteries to the bow thruster
We have bought batteries to the bow thruster and will start the installation. The outside hull is washed and we will prepare the antifouling-application. The new charger: https://sterling-power.com/collections/battery-to-battery-chargers/products/2015-bat...
Salt & Tar: Episode 70-Not Mistakes, Lessons
Multiple projects and one big mess. It's hard to keep things organized when you also want to get things done. Sometimes you just have to sacrifice. That's the thing with boats... If you know, then I don't need to explain further, if you don't but have a bo...
Just About Sailing December 2 2019 – Diesel Heater water trap, solar fan, early Christmas presents
Getting a few jobs done before the end of the year. Fitting the water trap on the Chinese diesel heater exhaust. Water trap works fine; but problems with the heatproof tape. Washboards are now ready for epoxy and varnish. New solar powered ventilator fan....
Merry Christmas🎄 & Happy New Year🎇
We have decided to prioritize a bit at the moment. Everything has just gotten so overwhelming between juggling our boat and other projects we have had so we have taken a step back from YouTube till January to focus on finishing our boat & getting these...
How Much Epoxy Have We Used? – Onboard Lifestyle ep.92
On this week's episode of Onboard Lifestyle , we announce the winners of our contest of how many gallons of West System Epoxy we have used to refit our custom 435 catamaran SV basik. We also tackle a few projects before spending "Emma Day" with the famil...
S3 #11 DIY boatwork fiberglass and cold epoxy
The temperature and weather is getting better and we can laying up fiberglass outside and then continue with our new bow thruster...
S3 #10 DIY boatwork fiberglass and a stupid mistake
We have started to close some of the holes in the bottom, but we get an challenge and could not handle the moisture on the hull due to the low outside temperature.
S3 #8 DIY boatwork shaft and bow thruster (ENG subtitles)
There is applied filler around the thruster tunnel and the shaft is placed.
s3 #7 DIY boatwork The new bow thruster (ENG subtitles)
The parts to the engine is not arrive, so we will start mounting the bow thruster.
Emily Builds a Sailboat – REDESIGN! – CLC Eastport Nesting Pram (Ep 4)
PROBLEMS SOLVED! Chesapeake Light Craft comes to the rescue! We have worked out the issues with starting with the wrong plans. We have worked out a design to make my boat able to do everything I want it to, including nesting, and a lot of ideas of our o...
Sæson 3 #6 Motoren er på plads
Motoren er kommet ind på plads og vi er startet stille op på bovpropel.
Acorn to Arabella – Journey of a Wooden Boat – Episode 87: Epoxy Tests
After our glue failure on the scarf joints for the planks, we also had some glue failure on the graving pieces. This time though, it was with a new and good batch of Resorcinol. So, we were not quite sure what the problem was at first. We later realized ...
Ep. 28 – The Propane, Fairing, and Epoxying Life
In this episode we trouble shoot our outboard engine a little more, finally get the propane working and cook our first hot meal on board in months, and begin work on fairing the keel and rudder. Our friend Kari from Iceland also joins us for a week helping...
Sæson 3 #5 Hul til stævnrør
Der skåret hul til stævnrøret og vi er startet på at male motorrummet.