Diy boat refit YouTube Videos
Showing 16-29 of 29 results
BOATYARD 3/3: Priming, Painting and it Looks Like a NEW Boat! and IT’S SPLASH DAY !! // Ep. 43
(🇫🇷 juste dessous ) Last part of our boatworks at the boatyard! ... Finally, because we were starting to get impatient to be back on the water! On the program: make a hole in the hull to install the depth gauge probe, make 4 coats of two-component p...
BOATYARD: Scratching ( again!..), Grinding, Sanding and CEMENT to Clog our Holes! // Ep. 42
(🇫🇷 Juste en dessous) At the boatyard we were, at the boatyard we are still. Last week (to see in this episode: https://youtu.be/9SNgUGdx1b4), we started to scratch the hull to bare it and we removed the rudder wick which was well stuck. This week...
BOATYARD: We Make HOLES on Our SAILBOAT+ All The Way to The CEMENT for a BARE Hull! // Ep.41
(🇫🇷 Juste en dessous) Part 1: And Boatyard mode is ON! On the menu: bare the hull, remove the well-stuck rudder wick ( do you remember how hard it was to turn the wheel? We couldn’t have cross an ocean like this) and make HOLES in the hull with the...
Just One More Boat, Wind over Water – In the Boatyard, Episode #81
First we get some work done in the shop and then go for a road trip to buy our daughter Molly another boat....yes you heard that right...Molly wants another boat. Wind over Water is sponsored in part by: Marine Solar Innovations - https://marinesolar.co...![Can we stop the leaks? [Adventure #203]](https://i.ytimg.com/vi_webp/UAk1YVIa5xg/maxresdefault.webp)
Can we stop the leaks? [Adventure #203]
There’s no better way to find all the leaks than to spend a winter in the Pacific Northwest... Find out how we address a leaking hatch that is brand new from the factory, and learn a cheap trick for a water-tight mast boot! ________________ We hope yo...
Bling n’ Bumpers, Wind over Water – In the Boatyard, Episode #79
We finish up with the stanchion repair with one more day in the shop. A bunch of big packages arrive at our front door with more parts for the refit. Wind over Water is sponsored in part by: Marine Solar Innovations - https://marinesolar.com/ Mack Sails...![How to Fix Sticky Slides and Sail Repair [Adventure #202]](https://i.ytimg.com/vi_webp/I3T7FoQr9-U/maxresdefault.webp)
How to Fix Sticky Slides and Sail Repair [Adventure #202]
Sticky mainsail slides can be a big problem! Especially when retrofitting new slides to an old mainsail track. See what innovative solution we came up with, without spending big bucks on a proprietary system! Also, learn how we reinforced the leech on o...![Assembly Required DIY Sailboat Projects [Adventure #201]](https://i.ytimg.com/vi_webp/KcbpsepMXyI/maxresdefault.webp)
Assembly Required DIY Sailboat Projects [Adventure #201]
The sailboat refit continues as we struggle with removing and re-installing a laminate countertop with contact cement. We also put the finishing touches on the main salon, bringing the new settee cushions out and and installing a brand new table. ________...
Pins and Polish, Wind over Water – In the Boatyard, Episode #77
We begin the process of polishing the corroded stainless steel bits on the boat. Debbie shows step by step how to make your own DIY leather wheel wrap. The new Windover is going to sparkle! #diyleatherwheelwrap #polishingstainless #diyboatrefit #sailboatre...
Getting Rid of our Masking Tape Boat Name! | ⛵ Sailing Britaly ⛵
In this video we start fitting our Vinyl decals so that our boat name and registration number will no longer be written by hand on masking tape! We then take you for a walk around the historic village of Upnor in Kent, UK, where we have a look around with ...
You Cleaned your Bilges with WHAT?! | ⛵ Sailing Britaly ⛵
In this video we complete the rudder repair, hoist the sails, clean the bilges and get very close to being ready to splash! 🔔 SUBSCRIBE ➜ http://bit.ly/SBYouTube⛵ Join our Patreon Crew here! http://patreon.com/sailingbritaly Selden in-mast furling ...
The Rudder Repair Continues | ⛵ Sailing Britaly ⛵
Yesterday's fibreglass work was good and today we broke the rudder free from the lower bush. 🔔 SUBSCRIBE: http://bit.ly/Subscribe⛵ Now all we need to do is add abrasives into the rudder tube and move the rudder back and forward however many [thousand...
Family Fun During our Refit | ⛵ Sailing Britaly ⛵
4 days until we launch! Today our engine and saildrive were reunited. They aren't the only happy family on board, as despite being in the middle of a DIY refit, the three of us are having lots of fun together! 🔔 SUBSCRIBE ➜ http://bit.ly/SBYouTube⛵ ...