Carpentry YouTube Videos
Showing 181-195 of 495 results
Sealing Up the Fridge – Episode 191 – Acorn to Arabella: Journey of a Wooden Boat
There are a lot of steps to each of the things we do on Arabella, especially in the interior, and between those multiple paint coats drying, that epoxy curing, and intense reading about 12 V DC electrical systems, there's plenty to do around and about to p...
A Little Help From the Masters – Episode 190 – Acorn to Arabella: Journey of a Wooden Boat
"Before the snow flies," is a busy time around a farm, and this year it involves improvements to the shed, fixing Akiva's platform, and doing a few other labor-intensive tasks for which we had a passionate group of volunteers to help with. Thank you very m...
Bringing Home the Fiberglass – Episode 189 – Acorn to Arabella: Journey of a Wooden Boat
The finishing touches go onto the shower pan, which gets a drain installed, and the anchor locker, which gets an outlet for gunk that might make its way via the anchor chain. Two-part epoxy paint serves as yet another waterproof barrier for these pieces, w...
Three Fiberglass Projects – Episode 188 – Acorn to Arabella: Journey of a Wooden Boat
The usefulness of fiberglass, when applied in the right places, makes the proper application of it an important skill. This week, we tackle three projects, two of which call for fiberglass sheathing, and a third that is a layup set over a mold that will ev...
The Chart Table – Episode 187 – Acorn to Arabella: Journey of a Wooden Boat
It seems like we start something, get it to a point, then move on to the next thing... and that's completely on purpose. We'll be able to know where we want our electronics and systems aboard the boat, and still be able to run the wiring and hoses for them...
A Grizzly in the Boathouse – Episode 186 – Acorn to Arabella: Journey of a Wooden Boat
Steve is the 5th generation of his family to live at Pinetum Farm, and many of his tools are lovely hand-me-downs, but some are workhorses he bought at the start of the project for as much bang as he could get for the buck. Unfortunately, the Delta thickne...
Counter Install & Annapolis Sailboat Show—Episode 185—Acorn to Arabella: Journey of a Wooden Boat
Before we went to the boat show, Steve made progress with the galley sink, counter, and stowage area. He broke out some locust and used cherry for the first time—some sweeping, beautiful curves have made a beautiful cubby for needful things where food pr...
Fitting the Galley Sink – Episode 184 – Acorn to Arabella: Journey of a Wooden Boat
We hope you caught the live discussion with Chesapeake Light Craft's John Harris that stood in for last week's episode. If not, here it is: https://youtu.be/498a2IpwfAc And we went aboard Calypso, a Bristol Channel Cutter (hull No. 6, built by the Sam L. ...
LIVE Sailboat Tour of Bristol Channel Cutter Calypso – Acorn to Arabella: Journey of a Wooden Boat
We went live aboard a small cruising boat in Annapolis during the Annapolis Sailboat Show with Nica and Jeremy Waters, cruisers who went all-in on their beloved 28' Bristol Channel Cutter, Calypso. Over the last few years they've made a great many updates ...
Tender Design & Selection w/ Designer John Harris – Acorn to Arabella: Journey of a Wooden Boat
The sound gets better at 13:11! Thanks for your patience. We had the mics turned down from the noisy day before, when we were walking around a crowded show grounds. Steve and Annie B met up with John Harris, owner and CEO of Chesapeake Light Craft www.cl...
We’ll Be Live from the 2021 Annapolis Sailboat Show – Acorn to Arabella: Journey of a Wooden Boat
Here are the streaming and in-person events over the coming week: 7 a.m. ET, Friday, October 15: A2A Live from the Annapolis Sailboat Show The stream will be here: https://youtu.be/498a2IpwfAc A look around, and talking tenders with John Harris of Chesa...
Working Towards the Galley & Alix Update – Episode 183 – Acorn to Arabella: Journey of a Wooden Boat
Oh what a tangled web we weave! Anyone will tell you about the compromises in nearly all liveaboard choices, and to be sure at least a vast majority of cubic inches are considered and cogitated upon, this week's episode takes a hard 90-degree turn into an ...
No-Glue Drawers – Episode 182 – Acorn to Arabella: Journey of a Wooden Boat
This week it's just what it says on the tin. Steve goes through making the four remaining drawers for the workbench after he finishes the proof-of-concept drawer he and Wes started. Victoria's drawers went from impossible-to-open to dry and super wiggly in...
Arabella’s Workbench, Part 2 – Episode 181 – Acorn to Arabella: Journey of a Wooden Boat
The Bellota the Bilge Dragon t-shirt can be found here: https://www.bonfire.com/bellota-the-bilge-dragon/ All of the milling in the last episode is starting to show its worth as the workbench comes together. The Emmert patternmaker's vise, which was a gen...