Watch Sailing & Boating Adventures Around the World – Page 12 of 12
Explore sailing, boating, and water sports through our curated video archive. From epic sea voyages to serene diving escapes, discover unforgettable adventures from top YouTube creators. Start your journey. Dream big. Sail far.
Showing 265-282 of 282 results
With a Little Help From Our Friends—Episode 161—Acorn to Arabella: Journey of a Wooden Boat
We're back to planking! We've asked some of our skilled friends to come back and help us get closer to closing up Arabella's hull. We have eight oak planks, a couple of cedar planks, and the black locust sheer strakes remaining for installation. After the remainder of the oak planks a...
Putting Taper in the Mast – Episode 160 – Acorn to Arabella: Journey of a Wooden Boat
Lots going on here at the boathouse. It's time to put the taper in the top of the mast. Turns out there's a little bit more to that than just doing a straight taper. We'll be talking about a certain kind of taper as well as figuring out how to accommodate the slip of the router in ...
Hooked Scarf Joints and Bilge Stringers – Episode 159 – Acorn to Arabella: Journey of a Wooden Boat
Bilge stringers (which we also call bilge bands) add longitudinal stiffness to Arabella in an area of the boat where it's needed. Carolyn, who's been working on fitting the stringers into the boat, gives us a good look at how she sneaks up on a very smart fit in a hooked scarf. Alix shows ...
Live From the Boat Shed 5—Acorn to Arabella: Journey of a Wooden Boat
Live Q&A Session we held on Friday, April 16 from Arabella’s boat shed in Granby, MA. We also talked about the important changes coming to Patreon as of May 1. Read more about that here: -----------------------------------------------------------------------------------------------------------...
There’s a New Shipwright in Town! – Episode 158 – Acorn to Arabella: Journey of a Wooden Boat
We are looking ahead to getting back to planking Arabella this summer. In order to do that, we are going to want all hands on deck, so we got a little help coming in. The first of the crew has arrived and she will be helping us for the next month or more. Carolyn has a good amount of experience in...
Fairing the Mizzen Mast – Episode 157 – Acorn to Arabella: Journey of a Wooden Boat
There is a lot of work going into restoring Victoria's old mast to be our mizzen mast. We already set up a sort of lathe and jig to cut kerfs into the mast so that we can then bring it down to a six inch diameter. To do that, I used a combination of a power planer and a hand plane to get down...
Homemade Oak Plywood – Episode 156 – Acorn to Arabella: Journey of a Wooden Boat
We're starting on the interior! At least starting with the pieces of the interior. Steve is milling up the stock that is going to become the bilge bands. These will get installed soon, when we get a new crew in to finish the planking. In the meantime, he is also making up our very own plywo...
Repurposing Victoria’s Mast – Episode 155 – Acorn to Arabella: Journey of a Wooden Boat
Getting Victoria early in the project was one of the best decisions we have made. There was so much good material packed in that little vessel, and it seems like she just keeps giving every day. From all the beautiful mahogany in her interior, to the bronze fittings and hardware she was decked out ...
The Mizzen Mast Step – Episode 154 – Acorn to Arabella: Journey of a Wooden Boat
With the main mast step finished, it's time to make the mizzen mast step. This one is significantly smaller as it will hold a significantly smaller mast and take less of a load. It feels like we're installing a sculpture as integral part of the boat! It's very satisfying to be making...
Victoria’s Mast – Episode 153 – Acorn to Arabella: Journey of a Wooden Boat
The bronze floors are done! It's a great feeling complete them and be able to move on to even more tasks that get us closer to launch. Steve keeps on with fitting the main's mast step, and Alix gets to work on figuring out the reuse of Victoria's spars. You may remember from previous ...
Mast Step and Alignment – Episode 152 – Acorn to Arabella: Journey of a Wooden Boat
With wrapping up the bronze floors comes working on the mast step. This wild looking piece is built up out of live oak and black locust and looks more like a sculpture than a structural element in the boat! We also check alignment on Arabella to see if everything is still where it should be. Grant...
Last Bronze Floors and a Mast Step – Episode 151 – Acorn to Arabella: Journey of a Wooden Boat
We finally get to finish up the work on the bronze floors. We had about six sets of frames that needed to go in once we removed the molds. These last sets all needed bronze floors made up for them as we couldn't make those on our first go around. That means, back to bending bronze and weldin...
Clean Bilge! – Episode 150 – Acorn to Arabella: Journey of a Wooden Boat
Building a boat can seem like an incredibly daunting task. One thing that has gotten us through these years is seeing it a lot of little things that need to be done and pieces that need to go together. This episode is very much dedicated to that ideology. We make a couple more fin head bolts to lo...
Cockpit Mockup – Episode 149 – Acorn to Arabella: Journey of a Wooden Boat
There are a lot of exciting things coming together at the moment. Steve installed the rest of the tie rods, Alix finished the sill for the deckhouse to sit on and we made a mockup of the cockpit! One task completely finished, one setting us up for the deckhouse construction when temperatures warm ...
Salt & Tar: Episode 94-Mizzen We’ve Been Missin’ (Reclaimed Mast)
Vagabond was an Atkin design "Little Maid of Kent" Schooner The journal found me 7 years ago and I held onto it in hope the owner would one day return. Little did I know, Garrett and I would build a boat and Vagabond's main mast would become the mizzen for our homebuilt ketch. Severa...
Acorn to Arabella – Journey of a Wooden Boat – Episode 66: Installing Pocket Keel Bolts
Now that we have all the floors fabricated and the majority installed, there are 4 more very important ones to focus on. The ones that tie the ballast keel to the keel timber. These four floors in the middle of the vessel will hold the bolts that capture the 4.5 ton keel and keep it connected to t...
Acorn to Arabella – Journey of a Wooden Boat – Episode 65: Installing the Bronze Floors
The prep is over with and it is finally time to install the bronze floors! We have invested so much time, energy and money in these and it is such a gratifying feeling to finally see them put in place. In the end, the installation went very smoothly and they all fit rather nicely. Other than havi...