3Di YouTube Videos
Showing 1-15 of 27 results
HOW TO SAIL FASTER AND CLOSER TO THE WIND? #NEWSAILS !
#catamaransailing #leopard48catamaran #sailing #newsails #northsails #sailloftcharleston #3Di We got new sails! Now we can sail faster and closer to the wind! Find out what we bought and why, as well as what performance improvements we achieved. TIMEL...
Northern Dancer V get NEW 3Di sails by North Sails!
No Patreon and no ads, just content for you to enjoy. If you want to help out, we do appreciate THUMBS UP, COMMENTS and having our episodes SHARED! Thanks for stopping by and following our sailing adventures. Alfy & Devlin s/v Northern Dancer V
S3 #26 How to fix leaking hatch:skylight DIY boatwork
We have postponed our closet and will start on all the small issues that we have onboard. We have used sikaflex 295 Uv, that should tolerate the uv from the sun.
S3 #25 CORONA update, the closet and the FAILURE !!
We give you an update on our CORONA situation and then we will continue with the closet. Wr have made the teat around the closet and will start on the doors, but... I fail :(
S3 #24 FAILURE on the shaft !! The new closet and prepare for the first sail DIY boatwork
A big failure on the have beeb seen by one of our subscribers and we will repair that. We have also worked on our closet and get all our boat-stuff down in the boat.
S3 #23 How to remove unwanted sound from propeller -DIY boatwork
We have booked the crane and been on the hard. The sound that we have from the "engine-area", could be from our new propeller and therefore, we decided to go on there hard. We grind the edges on the prop... Problem solved :)
S3 #20 DIY boatwork REFLOATING… And issues.
We have finaly water under our keel and can test engine and bow thruster, but there is some small issues that we need to take care of.
S3 #19 DIY boatworkBow thruster and antifouling
The antifouling is applied and the bow thruster will ready with all the electrical... We want to refloat.!!!
S3 #18 DIY boatwork batteries to the bow thruster
We have bought batteries to the bow thruster and will start the installation. The outside hull is washed and we will prepare the antifouling-application. The new charger: https://sterling-power.com/collections/battery-to-battery-chargers/products/2015-bat...
S3 #11 DIY boatwork fiberglass and cold epoxy
The temperature and weather is getting better and we can laying up fiberglass outside and then continue with our new bow thruster...
S3 #10 DIY boatwork fiberglass and a stupid mistake
We have started to close some of the holes in the bottom, but we get an challenge and could not handle the moisture on the hull due to the low outside temperature.
S3 #8 DIY boatwork shaft and bow thruster (ENG subtitles)
There is applied filler around the thruster tunnel and the shaft is placed.
s3 #7 DIY boatwork The new bow thruster (ENG subtitles)
The parts to the engine is not arrive, so we will start mounting the bow thruster.
Sæson 3 #6 Motoren er på plads
Motoren er kommet ind på plads og vi er startet stille op på bovpropel.