OLD SAILORS GET SHIT DONE T-SHIRT! 6 days left to buy!!
http://bonfire.com/abandoncomfort
UNCLE SCOTT, RANDI & JORDAN (https://www.youtube.com/channel/UCsVjvlRBIbWVTFtQXemzXqA) Thank you. We seriously couldn't have done this without you. Your backs are probably still sore from your day spent with your favorite slavedrivers :)
THE NITTY GRITTY ON THE TEAK REMOVAL PROCESS:
The FWD half of the boat and AFT deck was very easy to remove. No need to plane, heat up the adhesive or use an air chisel. Midships was very difficult to remove and in great shape. If the whole boat was in the shape of the midships planks we wouldn't be pulling 16 hour days hunched over - we'd be on some white sandy beach somewhere south with the original teak still on Luci. Unfortunately, that wasn't the case.
Our best practices for removing stubborn teak & not damaging the gelcoat:
1. Use pipe cutter drill bits to carve out around teak plugs
2. Flathead to pry out plugs & drill out screws
3. Use planer to reduce size of plank
4. Use heat gun to aid in removal of devils glue 33-year-old adhesive
5. Use hammer & flathead to carefully remove plank
6. Use oscillating tool to remove leftover adhesive
7. 60 grit to remove remaining stubborn adhesive
8. Drill out existing screw holes to aid in epoxy adhesion
9. Vacuum everything - especially deep into the screw holes
10. Prep & fill pre-existing screw holes with thickened epoxy
Learn About All the Ways You Can Support Our Show: http://AbandonComfort.com/support
Follow us on Instagram: http://bit.ly/2pMPpxf
Like us on Facebook: http://bit.ly/2pLGd9M
**Want to support us without costing you anything?**
Seriously, this won't cost you a dime and it really makes a huge impact on our abilities to produce full-time and not having to worry about working other jobs. Know that in the 30 seconds it takes to bookmark this link we're cheering you on and are immensely grateful for your contribution to our production. THANK YOU!
USE THIS LINK EVERY TIME YOU SHOP ON AMAZON - http://amzn.to/2wl9mfz
--------------------------------------------------------------------------------------- (Bookmark It!)
***MUSIC IN THIS EPISODE***
Follow our playlist to listen to all songs featured in episodes: https://open.spotify.com/user/1234107235/playlist/2O63jAj73y7cnXsTWK7Uf3
With Love,
Ryan & Kelsey
At WeBoating.com, we profoundly acknowledge the unwavering dedication that Abandon Comfort invests in crafting each and every video or voyage. Their passion for delivering exceptional ocean content shines through every frame, and it's a labor of love that deserves your attention.
We invite you to watch their captivating videos here and actively engage with their content, including their social media links above. Liking, commenting, and sharing their work goes a long way in fueling their creative fire.
We're also inviting you to explore the gear, sponsorships, and boat partnerships highlighted in the "27] Taking Luci's Top Off! | Abandon Comfort - DIY Sailboat Teak Deck Removal" video description, or directly on YouTube. By engaging with these offerings or purchasing services and items, you directly support Abandon Comfort, their collaborators, and the brands they're associated with.
To ensure you never miss an offshore update, consider visiting their official YouTube Channel to subscribe, like, and join their community directly.
If you have any feedback, corrections, or additional information about Abandon Comfort or their videos, please use the comment form below to share your thoughts with us.
Thank you for being a part of our community and supporting the creators we cherish. Your time and support truly matter!
OLD SAILORS GET SHIT DONE T-SHIRT! 6 days left to buy!!
http://bonfire.com/abandoncomfort
UNCLE SCOTT, RANDI & JORDAN (https://www.youtube.com/channel/UCsVjvlRBIbWVTFtQXemzXqA) Thank you. We seriously couldn’t have done this without you. Your backs are probably still sore from your day spent with your favorite slavedrivers 🙂
THE NITTY GRITTY ON THE TEAK REMOVAL PROCESS:
The FWD half of the boat and AFT deck was very easy to remove. No need to plane, heat up the adhesive or use an air chisel. Midships was very difficult to remove and in great shape. If the whole boat was in the shape of the midships planks we wouldn’t be pulling 16 hour days hunched over – we’d be on some white sandy beach somewhere south with the original teak still on Luci. Unfortunately, that wasn’t the case.
Our best practices for removing stubborn teak & not damaging the gelcoat:
1. Use pipe cutter drill bits to carve out around teak plugs
2. Flathead to pry out plugs & drill out screws
3. Use planer to reduce size of plank
4. Use heat gun to aid in removal of devils glue 33-year-old adhesive
5. Use hammer & flathead to carefully remove plank
6. Use oscillating tool to remove leftover adhesive
7. 60 grit to remove remaining stubborn adhesive
8. Drill out existing screw holes to aid in epoxy adhesion
9. Vacuum everything – especially deep into the screw holes
10. Prep & fill pre-existing screw holes with thickened epoxy
Learn About All the Ways You Can Support Our Show: http://AbandonComfort.com/support
Follow us on Instagram: http://bit.ly/2pMPpxf
Like us on Facebook: http://bit.ly/2pLGd9M
**Want to support us without costing you anything?**
Seriously, this won’t cost you a dime and it really makes a huge impact on our abilities to produce full-time and not having to worry about working other jobs. Know that in the 30 seconds it takes to bookmark this link we’re cheering you on and are immensely grateful for your contribution to our production. THANK YOU!
USE THIS LINK EVERY TIME YOU SHOP ON AMAZON – http://amzn.to/2wl9mfz
————————————————————————————— (Bookmark It!)
***MUSIC IN THIS EPISODE***
Follow our playlist to listen to all songs featured in episodes: https://open.spotify.com/user/1234107235/playlist/2O63jAj73y7cnXsTWK7Uf3
With Love,
Ryan & Kelsey
Explore the most recent voyages. Subscribe to the channel to never miss an update!