Sailing Yabá – Page 6

Watch Sailing Yabá from the Beginning!

Showing 181-216 of 319 results
⚡Power Overboard! Ultimate Off-Grid Electric Setup on a Boat 🛠️⚓ — Sailing Yabá 162
Sailing Yabá
⚡Power Overboard! Ultimate Off-Grid Electric Setup on a Boat 🛠️⚓ — Sailing Yabá 162
Check our electrical set up: https://www.sailingyaba.com/lithium USE CODE “YABA” FOR SPECIAL DISCOUNT ON BATTERIES Bringing Yabá from wreck to dreamy! Episode 162 In this episode of our boat restoration, we share with you our electric system, its com...
The Ultimate Christmas Shopping List (for water people, DIYers, dog lovers & more!)
Sailing Yabá
The Ultimate Christmas Shopping List (for water people, DIYers, dog lovers & more!)
CHECK THE WHOLE LIST HERE: http://sailingyaba.com/merry-christmas And Happy Christmas preparations! 👉 SUBSCRIBE to not miss out on the new episodes: https://bit.ly/3dI3hBn YOU CAN SUPPORT OUR PROJECT: 👉 By becoming a patron - join to unlock exclu...
These stainless plates have to hold our hardwood masts up (boat restoration) — Sailing Yabá 163
Sailing Yabá
These stainless plates have to hold our hardwood masts up (boat restoration) — Sailing Yabá 163
Bringing Yabá from wreck to dreamy! Episode 163 In this episode of our boat restoration, we give some love to outer side of our pilothouse and we also tackle the standing rigging of Yabá. 👉 SUBSCRIBE to not miss out on the new episodes: https://bit...
Connecting the diesel tanks of our once WRECKED SAILBOAT (boat rebuild project) — Sailing Yabá 164
Sailing Yabá
Connecting the diesel tanks of our once WRECKED SAILBOAT (boat rebuild project) — Sailing Yabá 164
Bringing Yabá from wreck to dreamy! Episode 164 In this episode of our boat restoration, we finally connect our diesel tanks so our engine can actually take us somewhere when the time comes. But we not only put them together, we make sure we come up with ...
Wooden boat LAUNCH and wrapping up for CHRISTMAS 🎅🏼🎄 restoration project — Sailing Yabá 165
Sailing Yabá
Wooden boat LAUNCH and wrapping up for CHRISTMAS 🎅🏼🎄 restoration project — Sailing Yabá 165
Bringing Yabá from wreck to dreamy! Episode 165 In this episode of our boat restoration, Ben continues working on the chain plates while the Christmas spirit invades the shipyard. He’s making a boat, he’s measuring twice, he's gonna find out if it’s...
Steering upgrades: Ready to steer our rescued boat — Sailing Yabá 166
Sailing Yabá
Steering upgrades: Ready to steer our rescued boat — Sailing Yabá 166
Bringing Yabá from wreck to dreamy! Episode 166 In this episode of our boat restoration, we improve our steering system and we can finally check it off the to-do list! Now our rudder is ready to steer Yabá to wherever we feel like taking her! 👉 SUBSC...
Our complete rebuilt WOODEN SAILBOAT now has running water (DIY restoration) — Sailing Yabá 167
Sailing Yabá
Our complete rebuilt WOODEN SAILBOAT now has running water (DIY restoration) — Sailing Yabá 167
Bringing Yabá from wreck to dreamy! Episode 167 In this episode of our boat restoration, we start to build our plumbing system and then test it out! 👉 SUBSCRIBE to not miss out on the new episodes: https://bit.ly/3dI3hBn YOU CAN SUPPORT OUR PROJEC...
Launch countdown starts NOW! Building diesel tank mounts to test our engine — Sailing Yabá 168
Sailing Yabá
Launch countdown starts NOW! Building diesel tank mounts to test our engine — Sailing Yabá 168
Bringing Yabá from wreck to dreamy! Episode 168 In this episode of our boat restoration, we start the countdown until we launch. We challenged ourselves with the task of putting Yabá in the water before shrimping season and to show exactly how much we ca...
Adding a 45-foot sacrificial keel to our wooden boat (daily countdown episodes) — Sailing Yabá 169
Sailing Yabá
Adding a 45-foot sacrificial keel to our wooden boat (daily countdown episodes) — Sailing Yabá 169
Bringing Yabá from wreck to dreamy! Episode 169 In this episode of our boat restoration, we build and install our sacrificial keel. This is Day 1 from our series of daily updates until we can finally splash! 👉 SUBSCRIBE to not miss out on the new epis...
Extending our keel for safety reasons (daily episode #2) — Sailing Yabá 170
Sailing Yabá
Extending our keel for safety reasons (daily episode #2) — Sailing Yabá 170
Bringing Yabá from wreck to dreamy! Episode 170 In this episode of our boat restoration, we finish installing our sacrificial keel, extend our keel under the rudder, get a badass raw water filter for our engine and farewell our first neighbor ever! 👉 ...
Why would we WELD the keel of a WOODEN boat? Daily episodes #3 — Sailing Yabá 171
Sailing Yabá
Why would we WELD the keel of a WOODEN boat? Daily episodes #3 — Sailing Yabá 171
Bringing Yabá from wreck to dreamy! Episode 171 In this episode of our boat restoration, we start installing a metal plate around our keel in the prop area, for reinforcement and protection. 👉 SUBSCRIBE to not miss out on the new episodes: https://bi...
Wooden sailboat refit: That’s not what a through hull is for! — Sailing Yabá 172
Sailing Yabá
Wooden sailboat refit: That’s not what a through hull is for! — Sailing Yabá 172
Bringing Yabá from wreck to dreamy! Episode 172 In this episode of our boat restoration (Day 4 of our launch countdown) we continue building a metal plate around our prop area and also finish installing the first thru-hull (above the waterline) and to tes...
Rebuilding a wooden sailboat: the first underwater thru-hull — Sailing Yabá 173
Sailing Yabá
Rebuilding a wooden sailboat: the first underwater thru-hull — Sailing Yabá 173
Bringing Yabá from wreck to dreamy! Episode 173 In this episode of our boat restoration, we share our DAY 5 towards launch! We finish installing the metal plate around the prop area and even paint it for protection and then we also make OUR FIRST UNDERWAT...
Wooden boat refit: We have engine cooling and added some shade to the deck  — Sailing Yabá 174
Sailing Yabá
Wooden boat refit: We have engine cooling and added some shade to the deck — Sailing Yabá 174
Bringing Yabá from wreck to dreamy! Episode 174 In this episode of our boat restoration, we add the salt water intake for the cooling system of our engine and install our bimini. 👉 SUBSCRIBE to not miss out on the new episodes: https://bit.ly/3dI3hBn...
12V is not enough! Converting our wooden sailboat to 24V (DIY restoration) — Sailing Yabá 175
Sailing Yabá
12V is not enough! Converting our wooden sailboat to 24V (DIY restoration) — Sailing Yabá 175
https://shopsailingyaba.com Bringing Yabá from wreck to dreamy! Episode 175 In this episode of our boat restoration, we play electrician once again and convert our control panel from 12V to 24V. Then we install it in place and start making more connectio...
Wooden sailboat restoration: we would have sunk until now — Sailing Yabá 176
Sailing Yabá
Wooden sailboat restoration: we would have sunk until now — Sailing Yabá 176
Bringing Yabá from wreck to dreamy! Episode 176 In this episode of our boat restoration, we start caulking the last plank of the hull as well as the deck, add epoxy to the sacrificial keel and work on our chainplates. Enjoy! 👉 SUBSCRIBE to not miss o...
Drilling important holes in a 2 inches wooden boat’s hull — Sailing Yabá 177
Sailing Yabá
Drilling important holes in a 2 inches wooden boat’s hull — Sailing Yabá 177
Bringing Yabá from wreck to dreamy! Episode 177 In this episode of our boat restoration, we drill our toilet's thru-hulls, caulk the last plank together with the keel, start working on the panel of our bilge-pumps switches and get the visit of a very adve...
This rescued wooden boat won’t sink anymore: installing big bilge pumps — Sailing Yabá 178
Sailing Yabá
This rescued wooden boat won’t sink anymore: installing big bilge pumps — Sailing Yabá 178
Bringing Yabá from wreck to dreamy! Episode 178 In this episode of our boat restoration, we finally start installing our first bilge pumps! Not just adding them into place, but actually connecting them electrically to our control panel. Besides, we also w...
Prepping our WOODEN BOAT for LAUNCH! Transducer, pumps and through hulls — Sailing Yabá 179
Sailing Yabá
Prepping our WOODEN BOAT for LAUNCH! Transducer, pumps and through hulls — Sailing Yabá 179
https://shopsailingyaba.com Bringing Yabá from wreck to dreamy! Episode 179 In this episode of our boat restoration, we install our transducer, make more thru-hulls and update our bilge pumps switches. 👉 SUBSCRIBE to not miss out on the new episodes: ...
We drilled the wrong hole! Boat building, beers, barbecue and friends — Sailing Yabá 180
Sailing Yabá
We drilled the wrong hole! Boat building, beers, barbecue and friends — Sailing Yabá 180
https://shopsailingyaba.com Bringing Yabá from wreck to dreamy! Episode 180 In this episode of our boat restoration, we drill the last holes through our hull. We almost managed to finish that task without a single mistake but... sh* happens! Besides that,...
Boat restoration diaries: what it really looks like to face the high and lows — Sailing Yabá 181
Sailing Yabá
Boat restoration diaries: what it really looks like to face the high and lows — Sailing Yabá 181
https://shopsailingyaba.com Bringing Yabá from wreck to dreamy! Episode 181 In this episode of our boat restoration, we install our heads thru-hulls and finish the installation of our most forward bilge pump while fighting an on-an-off rain. 👉 SUBSCR...
Wooden boat restoration project: Lithium batteries & Anti-fouling — Sailing Yabá 182
Sailing Yabá
Wooden boat restoration project: Lithium batteries & Anti-fouling — Sailing Yabá 182
https://www.sailingyaba.com/lithium Bringing Yabá from wreck to dreamy! Episode 182 In this episode of our boat restoration, we finally install our Battle Born LiFePo4 batteries in place, together with our Victron Energy equipment, like the MPPT and the ...
Rebuilding a wrecked wooden boat: WE ARE FINALLY OFF-GRID! — Sailing Yabá 183
Sailing Yabá
Rebuilding a wrecked wooden boat: WE ARE FINALLY OFF-GRID! — Sailing Yabá 183
https://www.sailingyaba.com/lithium Bringing Yabá from wreck to dreamy! Episode 183 In this episode of our boat restoration, we paint our worm shoe, add thru-hulls, fix Loïc's motorbike, but most important of all: we connect our LiFePo4 Battle Born Batte...
Bilge pump acrobatics and off grid wooden boat restoration — Sailing Yabá 184
Sailing Yabá
Bilge pump acrobatics and off grid wooden boat restoration — Sailing Yabá 184
Bringing Yabá from wreck to dreamy! Episode 184 In this episode of our boat restoration, the weather really wasn't on our side but we still managed to finish installing our bilge pumps and finally added check valves to them. 👉 SUBSCRIBE to not miss o...
Welcome to everyday life of our wooden boat rebuild project — Sailing Yabá 185
Sailing Yabá
Welcome to everyday life of our wooden boat rebuild project — Sailing Yabá 185
Bringing Yabá from wreck to dreamy! Episode 185 In this episode of our boat restoration, we continue our electrical installation as we want to be able to charge our now connected lithium batteries with shore power. We also prepare the hull to receive the ...
Fastening CHAINPLATES to our WOODEN sailboat (restoration project) — Sailing Yabá 186
Sailing Yabá
Fastening CHAINPLATES to our WOODEN sailboat (restoration project) — Sailing Yabá 186
Bringing Yabá from wreck to dreamy! Episode 186 In this episode of our boat restoration, we finally installed our chainplates! Who's ready to go sailing? 👉 SUBSCRIBE to not miss out on the new episodes: https://bit.ly/3dI3hBn YOU CAN SUPPORT OUR PR...
Installing Yabá’s anchor bow roller (complete boat rebuild) — Sailing Yabá 187
Sailing Yabá
Installing Yabá’s anchor bow roller (complete boat rebuild) — Sailing Yabá 187
https://shopsailingyaba.com Bringing Yabá from wreck to dreamy! Episode 187 In this episode of our boat restoration, we got to the boat after a surf session to get our anchor bow roller installed into place. 👉 SUBSCRIBE to not miss out on the new epi...
Finishing the unfinished: Day 20 of launching our wrecked sinking wooden sailboat — Sailing Yabá 188
Sailing Yabá
Finishing the unfinished: Day 20 of launching our wrecked sinking wooden sailboat — Sailing Yabá 188
https://www.sailingyaba.com/lithium Bringing Yabá from wreck to dreamy! Episode 188 In this episode of our boat restoration, we finish installing our anchor roller, our starboard chainplates, and on an electrical note, our Cerbo GX and our DC to DC charge...
Hoisting Yabá’s anchors: which is the right one?— Sailing Yabá 189
Sailing Yabá
Hoisting Yabá’s anchors: which is the right one?— Sailing Yabá 189
Bringing Yabá from wreck to dreamy! Episode 189 In this episode of our boat restoration, we finish installing all the main mast chainplates and try the anchor windlass (manually) for the first time. We also show all three anchors of Yabá and make a choic...
Boat rebuild: we can finally say SHE FLOATS! (+ boat flips and needs big fixes) — Sailing Yabá 190
Sailing Yabá
Boat rebuild: we can finally say SHE FLOATS! (+ boat flips and needs big fixes) — Sailing Yabá 190
Bringing Yabá from wreck to dreamy! Episode 190 In this episode of our boat restoration SO MUCH HAPPENS! We close the hull completely so if there's ever a flood, we will float for sure, FOR THE FIRST TIME! We also finish installing the chainplates, work ...
Boat launching to-do list: you’re gonna either love us or hate us for this — Sailing Yabá 191
Sailing Yabá
Boat launching to-do list: you’re gonna either love us or hate us for this — Sailing Yabá 191
To see more about our Victron GX touch screen and other components of our electrical system check: https://www.sailingyaba.com/lithium Bringing Yabá from wreck to dreamy! Episode 191 In this episode of our boat restoration, we share our to-do list of thin...
We fought a good fight but we can’t keep going anymore — Sailing Yabá 192
Sailing Yabá
We fought a good fight but we can’t keep going anymore — Sailing Yabá 192
Bringing Yabá from wreck to dreamy! Episode 192 In this episode of our boat restoration, we explain why we had to let go of our deadline and we open our hearts about how frustrating things can get. We also work on our bow sprit, engine inlet and muffler o...
Installing a restored muffler to the exhaust system of our once wrecked boat — Sailing Yabá 193
Sailing Yabá
Installing a restored muffler to the exhaust system of our once wrecked boat — Sailing Yabá 193
Bringing Yabá from wreck to dreamy! Episode 193 In this episode of our boat restoration, we restore and install our exhaust muffler, add flooring to our engine room and work on our bow sprit and cathead. 👉 SUBSCRIBE to not miss out on the new episode...
We waited 3 years to do this to our restored wooden boat! — Sailing Yabá 194
Sailing Yabá
We waited 3 years to do this to our restored wooden boat! — Sailing Yabá 194
Bringing Yabá from wreck to dreamy! Episode 194 In this episode of our boat restoration, our friend Ryan visits us from Belgium to help us speed up our launch. We work on chainplates, bowsprit and diesel tank supports. We hope you enjoy it! 👉 SUBSCRIB...
Rescued wooden boat restoration: Underwater Lights, Camera, Action! — Sailing Yabá 195
Sailing Yabá
Rescued wooden boat restoration: Underwater Lights, Camera, Action! — Sailing Yabá 195
Get our lights: https://amzn.to/42QuklI and https://amzn.to/3T9caZk Check more Lumitec products: https://www.lumiteclighting.com Listen to our friend's amazing tunes: https://rb.gy/4aze5k @LeoNocta Bringing Yabá from wreck to dreamy! Episode 195 In thi...
Installing all STANDING RIGGING and ILLUMINATING where the sun doesn’t shine! — Sailing Yabá 196
Sailing Yabá
Installing all STANDING RIGGING and ILLUMINATING where the sun doesn’t shine! — Sailing Yabá 196
Bringing Yabá from wreck to dreamy! Episode 196 In this episode of our boat restoration, we give Yabá her standing rigging back, which means we installed all the masts stays. We also finish installing our @LumitecLighting underwater lights and Yabá now ...

Something AWESOME is coming!
Be the FIRST to know⛵

Sign up for exclusive updates and be the first to hear when we go live!
Get sneak peeks, exciting announcement, and special content straight to your inbox!

We don’t spam! Read our privacy policy for more info.


WeBoating
Logo
Shopping cart