At the VEEM Marine complex in Western Australia, NautiStyles host Victoria Chalaya stepped onto the manufacturing floor to examine the industrial processes behind high-performance marine propellers. The facility represents decades of propulsion development, operating as an integrated plant where raw ingots are melted, cast, precision milled, and balanced under strict aerospace-grade tolerances. Victoria noted the shift in perspective required when entering the facility: “you will never look at the Marine propeller the same way.”
The tour began inside the foundry, an immense industrial space centered on electric induction furnaces capable of handling heavy structural pours. Trevor, leading the foundry operations, highlighted the plant capacity: “our Foundry which has got a capacity of 15 1/2” tonnes of liquid metal. The primary alloy used across marine applications is nickel aluminum bronze, universally known in maritime engineering as NiBrAl. This specialized bronze offers exceptional resistance to saltwater corrosion and cavitation fatigue, making it the benchmark material for commercial and high-speed motor yachts.
Operating at extreme thermal thresholds, the furnaces bring the nickel aluminum bronze charge to 1200 degrees Celsius before tapping. Trevor demonstrated how the foundry utilizes chemically bonded sand to form the rigid negative molds required for complex propeller geometries. The sand mixture features an organic binder that darkens in color as it undergoes successive recycling cycles, transitioning from initial pink tones to deep earth hues across repeated uses. This engineered sand retains structural integrity against the hydro-dynamic force of molten metal while allowing expanding gases to vent cleanly through porous channels.
Every casting mold incorporates sacrificial test bars situated directly at its base. When the pour is completed and cooled, technicians sever these test bars and transfer them to an internal metallurgical laboratory for destructive tensile strength testing and microscopic grain analysis. This validation confirms that the bronze alloy achieved the exact crystalline structure and density demanded before the raw casting ever reaches a machine tool. Molten metal is transferred into an insulated crane ladle, where foundry technicians introduce powdered fluxing agents to draw slag and oxides to the surface. After mechanical skimming, the degassed bronze streams directly into the sand molds, casting propeller hubs and blades in a single continuous structural unit.
Once cooled and broken out of their sand molds, raw bronze castings move into the machining hall. Historically, marine propellers were cast roughly to shape and finished by manual grinding, where individual craftsmen ground blade faces with pneumatic sanders. This traditional technique introduced subtle dimensional variations between blades and made identical replacements virtually impossible to reproduce without extensive hand-fitting.
VEEM solved this manufacturing hurdle by deploying high-precision 5-axis computer numerical control (CNC) milling centers. Massive gantry machines carve every square millimeter of the propeller blade surfaces, root fillets, and hub bores directly from digital design models. The automated cutting heads eliminate human error and achieve micron-level geometric accuracy. Engineering staff emphasized that this automated process ensures that “side to side boat to boat year to year the propellers are identical.” For vessel builders running production lines, identical propeller geometry guarantees that port and starboard engines experience identical loading and fuel burn across thousands of operational hours.
The shift from manual grinding to full CNC machining dramatically alters how water flows across the propeller foil. At elevated rotational speeds, microscopic imperfections on hand-ground blades create localized low-pressure zones, causing the surrounding water to vaporize into microscopic vapor cavities. When these cavities collapse against the bronze blade face, the resulting micro-jets pit the metal surface and erode propulsion efficiency, a destructive phenomenon known as cavitation.
Conventional hand-finished propellers frequently encounter severe cavitation barriers once vessel speeds reach 35 to 38 knots. In contrast, the micro-fine surface finish and hydro-dynamic contours generated by 5-axis CNC cutters maintain laminar flow across much higher velocity profiles. A VEEM technical lead explained the performance ceiling: “if you fully CNC machine and propeller you can run up as high as 53 knots.” This benchmark was proven during rigorous sea trials aboard a 64-foot test vessel, while modern series-production powerboats routinely cruise at 45 knots using fully machined wheel geometries without pitting or acoustic resonance.
Beyond geometric milling tolerances, the physical tour highlighted an innovative mechanical feature embedded directly into the trailing edge of VEEM propeller blades: the patented Interceptor system. Brad, who drove the development of this proprietary technology, presented the color-coded composite strips that slide into precision dovetail channels machined along the trailing edges.
Brad clarified the specialized material formulation: “this is high molecular weight polyethylene this is super stuff for marine applications.” The ultra-high molecular weight polyethylene (UHMWPE) exhibits remarkable durability in saltwater environments, defying initial industry expectations that composite inserts would wear down rapidly under high load. Early operational trials confirmed that burning thousands of liters of fuel caused negligible wear on the polymer strips.
The Interceptor system functions analogously to adjustable trim tabs or transom interceptors, but acts directly at the trailing edge of the rotating foil. By altering the effective camber of each blade, the inserts adjust effective propeller pitch without requiring shipyard dry-docking or mechanical pitch bending. VEEM produces the strips in 5 color-coded sizes, each corresponding to a specific pitch increment. If an owner adds heavy gear, voyages into tropical waters where engines derate from ambient heat, or shifts operational displacement, a diver or deckhand can slide out the existing strips and insert a replacement set while the vessel remains afloat at anchor.
The discussion of propulsion geometry expanded beyond traditional blade shapes to an industry-defining partnership. Transitioning to coverage from the Fort Lauderdale International Boat Show (FLIBS), Victoria met with Greg Sharrow, Founder and Chief Executive Officer of Sharrow Marine and Sharrow Engineering.
Greg Sharrow detailed the operational philosophy behind his revolutionary tipless rotor geometry: “we have figured out a way to more efficiently accelerate water.” Having developed the looped blade design over 10 years of intensive fluid-dynamics testing, Sharrow eliminated the conventional blade tip altogether. Traditional blade tips shed energetic tip vortices, which represent a major source of induced drag, acoustic disturbance, and high-speed cavitation. The continuous loop geometry distributes hydrodynamic loading evenly, yielding significant gains in fuel efficiency, cruising range, and onboard acoustic comfort.
Following the public debut of the outboard Sharrow propeller 3 years prior, commercial demand surged for large inboard yacht applications. In early 2023, Sharrow Marine and VEEM initiated discussions to join forces. The collaboration leverages VEEM’s casting and 5-axis CNC manufacturing infrastructure alongside Sharrow’s design portfolio, which encompasses over 160 patents worldwide. The resulting SHARROW by VEEM inboard propellers integrate VEEM’s patented Interceptor dovetail channels directly into the looped blade castings, combining tip-vortex elimination with on-water pitch adjustability.
Returning to the Canning Vale plant floor, Victoria examined the final quality control stations where completed wheels undergo dynamic balancing. Even with micron-tolerance CNC milling, minor density variations in raw cast bronze can induce rotating imbalances at cruising RPM.
Technicians mount each finished propeller onto a high-sensitivity balancing arbor linked to digital sensors. A balancing technician outlined the governing mechanical principle: “the center of mass is the same as the center of rotation so you are not getting any vibration.” While automotive tire shops correct imbalance by attaching external lead wheel weights, marine propeller balancers delicately shave minute fractions of metal from designated hub and blade zones until the center of mass aligns with the rotational axis. Once dynamically balanced, the installation of color-matched Interceptor strips does not disturb the balance profile, ensuring quiet propulsion across the vessel powertrain.
The manufacturing tour concluded with an inspection of the facility’s heavy mechanical division, prompting Victoria to reflect on the technological progression: “from the Bronze Age to the Space Age.” Within the expansive bays, autonomous laser-guided forklifts maneuver heavy bronze castings and steel components between machining centers without human intervention.
Technicians employ advanced GOM 3D optical scanning systems to verify physical part dimensions against CAD geometry, projecting structured blue light to capture millions of coordinate points across complex curvilinear surfaces. In addition to commercial marine propellers, the plant manufactures precision marine shafting and machines massive industrial crankshafts utilized in mining locomotives across Western Australia. Operating with a legacy spanning 55 years, VEEM remains one of only 2 manufacturing companies globally pre-qualified for specialized high-precision defense propulsion work, demonstrating the metallurgical and machining rigor applied to every yacht propeller leaving the facility.
The industrial capabilities and performance benchmarks demonstrated throughout the facility tour illustrate the parameters governing modern high-speed marine propulsion:
| Engineering Parameter | Operational Metric | Verification Detail | | :— | :— | :— | | Foundry Furnace Capacity | 15 Tonnes | Electric induction melting capacity for large casting runs | | Molten Pour Temperature | 1200 Degrees Celsius | Pouring temperature for nickel aluminum bronze (NiBrAl) | | Hand-Finished Speed Limit | 35 to 38 Knots | Velocity threshold where hand-ground blades induce cavitation | | CNC Maximum Hull Speed | Up to 53 Knots | Sea trial speed verified on a 64-foot test vessel | | Production Cruising Speed | 45 Knots | Routine operational speed on modern production powerboats | | Interceptor Strip Profiles | 5 Color Codes | Discrete pitch adjustment strips made of UHMW polyethylene | | Sharrow Global Patents | Over 160 Patents | Worldwide intellectual property portfolio for tipless rotors | | North American Service | 12 US Distributors | Certified facilities equipped with digital optical prop scanning | | Manufacturing Heritage | 55 Years | Continuous precision machining and foundry operations | | Naval Defense Qualification | 2 Companies Globally | Pre-qualified defense precision manufacturing rating |
VEEM Marine utilizes nickel aluminum bronze, commonly referred to as NiBrAl. This specialized marine bronze alloy is melted at 1200 degrees Celsius in electric induction furnaces and offers superior strength, corrosion resistance, and cavitation fatigue endurance.
Traditional hand-profiled propellers introduce minor blade-to-blade surface imperfections that trigger cavitation bubbles at speeds between 35 and 38 knots. Fully milling the entire propeller surface on 5-axis CNC centers preserves precise hydro-dynamic foil contours, enabling vessels to cruise smoothly at 45 knots and reach trial speeds up to 53 knots without cavitation pitting.
The Interceptor system uses durable ultra-high molecular weight polyethylene strips that slide into precision dovetail grooves along the trailing edges of the propeller blades. Available in 5 color-coded sizes, these strips alter blade camber and hydro-dynamic bite, allowing divers to adjust effective pitch in the water without hauling the vessel or bending the bronze blades.
Announced following discussions that began in early 2023, the collaboration combines Greg Sharrow’s patented tipless loop propeller geometry with VEEM’s 5-axis CNC machining and foundry infrastructure. The resulting inboard wheels eliminate energy-robbing tip vortices to reduce noise and fuel consumption, while integrating VEEM Interceptor strips for fine-tuned pitch adjustment.
Dynamic balancing ensures that the propeller’s center of mass precisely aligns with its center of rotation. By rotating each wheel on a sensor-equipped balancing machine and performing micro-adjustments across blade locations, technicians eliminate harmonic vibrations that could otherwise damage shaft bearings and hull structures.
At WeBoating.com, we profoundly acknowledge the unwavering dedication that NautiStyles invests in crafting each and every video or voyage. Their passion for delivering exceptional ocean content shines through every frame, and it's a labor of love that deserves your attention.
We invite you to watch their captivating videos here and actively engage with their content, including their social media links above. Liking, commenting, and sharing their work goes a long way in fueling their creative fire.
We're also inviting you to explore the gear, sponsorships, and boat partnerships highlighted in the "A New Type of Prop! 🤯 WATCH THIS" video description, or directly on YouTube. By engaging with these offerings or purchasing services and items, you directly support NautiStyles, their collaborators, and the brands they're associated with.
To ensure you never miss an offshore update, consider visiting their official YouTube Channel to subscribe, like, and join their community directly.
If you have any feedback, corrections, or additional information about NautiStyles or their videos, please use the comment form below to share your thoughts with us.
Thank you for being a part of our community and supporting the creators we cherish. Your time and support truly matter!
VEEM Marine info: https://bit.ly/VEEM_Props @veem_ltd
Become a NAUTI Member: https://bit.ly/NautiCrew
Follow Us Building an Explorer Yacht @NautiGuys https://bit.ly/3yPe1Z5
😜 Let me know what you guys think of this one in the comments
Welcome back to Australia... Can't wait to share this experience with you all! VEEM Marine completely blew us away with its ingenuity, engineering, and professionalism. So grab a drink of your choice, sit back, and enjoy this Over Hour wild ride into the world of the World's Best Boat & Yacht Props. I promise, after this Video you will never look at Boat Props the same way! "top secret" World Class PROPS making... and yes, we might just be getting these bad boys for our B82. 😜 Let me know what you guys think of this video in the comments.
#Australia #Yachts #NautiStyles
Propulsion REVOLUTION with VEEM Marine 🤯
Bloody Brilliant! 🇦🇺🤯 The Secret to the World's Best & Fastest Boat Props
//JOIN OUR NAUTI CREW: https://www.patreon.com/NautiStyles
From the start, we have decided to keep our independence & integrity, so we do not accept payments for Yacht Tours and do not "work for hire", this way we can choose and only Tour the vessels we find interesting for our audience. We are here to have FUN while checking out the coolest Yachts on the market and not taking ourselves too seriously!
THANK YOU FOR YOUR LIKES, COMMENTS, SHARES, AND SUBS!
THESE 4 SIMPLE CLICKS MAKE THIS CHANNEL POSSIBLE!!! :-)
//FOLLOW US:
○ Instagram: https://www.instagram.com/nautistyles/
○ Blog: https://nautistyles.com/index.html
○ Facebook: https://www.facebook.com/NautiStyles/
//SHOP NAUTI GEAR: https://shopnauti.com/
//CAMERA GEAR USED:
○ Camera - https://amzn.to/3Frfjfe
○ Drone 1 - https://amzn.to/3rZCA4S
○ Drone 2 - https://amzn.to/46EcEuK
○ Wireless Microphones - https://amzn.to/2FE0XNq
○ Wired Microphones - https://amzn.to/345jjQT
○ SD card - https://amzn.to/3j76sSv
○ Gimbal - https://amzn.to/3k9vXUr
○ Light - https://amzn.to/3dzBotx
//SUBSCRIBE HERE: https://www.youtube.com/channel/UCRft...
Bloody Brilliant! 🇦🇺🤯 Smoother, Faster, Quieter
//WATCH NEXT:
○ UNIQUE YACHTS: https://youtube.com/playlist?list=PL_MuaHEC2JeVkxJIS2lz_SeSQx4lnGSxM
○ AFFORDABLE LIVEABOARD: https://youtu.be/WYmINf_gmiQ
0:00 Intro
0:50 Perth, Australia
1:25 Foundry
3:57 Molds
10:11 Fully CNC
11:11 Cavitation
15:02 Interceptor
25: Sharrow by VEEM
29:24 Balancing
35:15 Family Legacy
35:50 Pre-Pour
43:50 The Pour
46:52 Robots
48:42 Recycling
53:58 Handle with Care
54:53 3D Printing
57:36 Conquest
59:30 Future
1:01:28 The Giant
1:02:22 Packaging
Thanks for watching!
Ahoy,
Captain V
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content each week!
Explore the most recent voyages. Subscribe to the channel to never miss an update!