YouTube Videos

Steve made the last oak plank! Yes, we know, we've said it before (and might say it again... haha). But we are planning for this to be the last full length oak plank we put on the hull. After setting up our new planer with Joe and Grandpa, while I was...

In the last episode, we broke a plank. No big deal though, as with everything we've come up on in the project, the key is just finding a way forward. So we cut the broken end off of the plank and figured out a way to rig it so that we could steam the en...

It's not every day you get the chance to fire up a coal-fired steam engine! I filmed the whole process, from the striking of a single match, to 40 tons of tug boat underway. 🔔 SUBSCRIBE (It's Free!) ➜ http://bit.ly/SBYouTube⛵ A big thank you to Der...

One of the great parts of boatbuilding (or maybe the hardest part about learning boatbuilding?!) is that there are many different ways to do things. And they are all correct! Steaming in Arabella's frames is a good example of this. All her framing so far...

We're moving right along with our silicon bronze floor timbers. We tacked most of the floor pieces together in preparation for welding them in batches. Before we can finish making the rest of the floor timbers though, we need to replace the frames that w...

All the frames are steamed in! AND we got donated a TON of white cedar! We have been thinking about our planking material since we started and were wondering if it would be worth buying cedar or if we were better off planking in our beautiful white oak...

As we steam in Arabella's frames we have now reached the aft section of the build and need to cut the rabbet up the sides of the stern posts to determine where our frame sockets should land. Once cut we spend a day steaming in frames with a couple snags a...

Arabella has 70 frames. That's a fair amount of steaming. So, we thought it would be interesting to show what a full day of steaming looks like. Not to mention, who can get tired of watching those timbers bend like that? -------------------------------...