YouTube Videos

In this episode we continue the Anchor Roller project! We glue it, do some de-coring and glass it in place. More boat work on the trampoline area coming up as well. Wilda is a Schionning Wilderness 1340 sailing catamaran. She is being finished in a shed ...

One of the nicest things about travelling in our little group, is when a special occasion happens. We celebrate together, reminding ourselves how lucky we have been to have found each other to help us work through this world pandemic COVID19. SUBSCRIBE h...

This video explains how to hoist a jib on a furling system, including setting up the furling drum and pre-feeder device before raising the sail. I'll explain issues to watch for during and following the hoisting procedure.

This video explains how to properly use a jib furler system, demonstrating what problems can occur and how to avoid those.

This is the final episode of the four part series of our standing rigging replacement. ----------------------------------------------------------------------------------------------------------------------------------------------- Not-A-Broker Consulting...

in this video I am building and mounting a new furling headstay on my old Albin ballad 30 classic GRP sailboat from 1976. Link to the manual: http://www.plastimo.com/media/catalog/product/files/5/8/58224_notice_enr_t.pdf

We started with a Harbor Freight Roller Bender and a set of HF dies for bending square tubing, and then beefed it up. We use a HF 12 Ton Hydraulic Pipe Bender to take out the sideways been that bending angle always give you and end up with at setup that w...

Presented by TheSailingChannel.TV From GET READY TO CRUISE Watch the FULL VIDEO at http://youtu.be/hnQDmBIjb7g The bow roller is a critical part of any cruising boat's anchoring system. In this tip from GET READY TO CRUISE, Larry describes the proper way ...