YouTube Videos

Acorn To Arabella

Acorn to Arabella – Journey of a Wooden Boat – Episode 82: Working on Prop Shaft Fittings

We are getting farther up the hull with the planking and as we do so, we are nearing the point at the stern where the propeller shaft will go through. We need to get this hole bored before we plank past it because we are going to need to be able to align ...

Published: Oct 04, 2019

Language: EN

Play Time: 00:00:22

Acorn To Arabella

Acorn to Arabella – Journey of a Wooden Boat – Episode 63: Welding the Bronze Floors

The end of the current metal work which comes with fabricating the bronze floors we are installing in Arabella is finally nearing its end. These structural members tie the frames to the centerline and whether they be wood or metal, are one of the most imp...

Published: May 24, 2019

Language: EN

Play Time: 00:00:23

Acorn To Arabella

Acorn to Arabella – Journey of a Wooden Boat – Episode 59: Clean up and Bronze Floors

We've all been looking forward to getting to work on the bronze floors but before we can do so, we had a bit more cleaning up to do in order to finish up with Victoria. As we're looking to save as much as possible, we had to strip all the planking of its f...

Published: Apr 26, 2019

Language: EN

Play Time: 00:00:21

Sampson Boat Co

Restoring a HUGE vintage Ship Saw / Bandsaw – Rebuilding TALLY HO EP22

Rebuilding a historic sailing yacht – Restoring the Ship Saw. Support; http://www.sampsonboat.co.uk/support-tally-ho Become a Patron; http://www.patreon.com/sampsonboatco ----- This episode, I take some measurements and consider the hogging of the hul...

Published: May 19, 2018

Language: EN

Play Time: 00:00:20

Acorn To Arabella

Acorn to Arabella – Journey of a Wooden Boat – Bonus Content: Dissimilar Metals Part 2

What a winter!.... We felt that this would be a good time to put out our dissimilar metals experiment back to back and then hit it hard next week with a full length video. When mixing metals in a build, there are a lot of things to consider. Not only do t...

Published: Apr 20, 2018

Language: EN

Play Time: 00:00:07

Acorn To Arabella

Acorn to Arabella – Journey of a Wooden Boat – Episode 26: Moving a 4.5 ton keel – Acorn to Arabella

It took us about three days to move the keel out of the ground and into the boathouse. No easy task moving an object that heavy. It's great to know that we now have our keel and it is sitting where it needs to be in the boathouse. Next we'll need to fai...

Published: Feb 23, 2018

Language: EN

Play Time: 00:00:18

Acorn To Arabella

Acorn to Arabella – Journey of a Wooden Boat – Episode 16: Melting Lead

The lead keel is one of the most exciting parts of this build at the moment but it is also the scariest, by far! We have melted down some of the wheel weights and loose lead in order to weigh it, while talking about that, we weigh in on the actual pour. ...

Published: Sep 15, 2017

Language: EN

Play Time: 00:00:19

SV Seeker

Metal Casting Injury – Warning disturbing images ;)

Published: Mar 24, 2012

Language: EN

Play Time: 00:00:01

SV Seeker

DIY Metal Casting Furnace Part 2

For more details see: http://www.svseeker.com/casting_furnaces.htm

Published: Feb 12, 2012

Language: EN

Play Time: 00:00:13

Register

Reset Password

YouTube Videos

Acorn to Arabella – Journey of a Wooden Boat – Episode 82: Working on Prop Shaft Fittings

Acorn to Arabella – Journey of a Wooden Boat – Episode 63: Welding the Bronze Floors

Acorn to Arabella – Journey of a Wooden Boat – Episode 59: Clean up and Bronze Floors

Restoring a HUGE vintage Ship Saw / Bandsaw – Rebuilding TALLY HO EP22

Acorn to Arabella – Journey of a Wooden Boat – Bonus Content: Dissimilar Metals Part 2

Acorn to Arabella – Journey of a Wooden Boat – Episode 26: Moving a 4.5 ton keel – Acorn to Arabella

Acorn to Arabella – Journey of a Wooden Boat – Episode 16: Melting Lead

Metal Casting Injury – Warning disturbing images ;)

DIY Metal Casting Furnace Part 2

Login

Register

Reset Password

YouTube Videos