YouTube Videos

Big progress fiberglassing a cracked hull on a neglected Tayana 55 Sailboat. The fiberglass work continues!! Brian contiues the fiberflass work on the hull. He finishes up the mast structure and places the bolts. This needed to be completed in preparation ...

From buying a sailboat, to making it ready to sail, to sailing the Caribbean ———————————————————————————— Want to see real-life updates and chat? https://www.patreon.com/huubvlogs Would you like to s...

Boat Refits Continue. For your chance to win the 4x4 Sprinter Van and support the Honnold Foundation enter at http://omaze.com/GWTW ❤ Join Our Crew! ❤ For exclusive content, behind the scenes & Q&A's: http://bit.ly/patreon-wynn https://www...

In this episode of Barefoot Sail and Dive we finally get to install our new windows! We go back in time a little bit to show you the original plan and then how we actually did it! With the windows in, Barefoot looks like a whole new boat! So should you b...

In this episode of Barefoot Sail and Dive we get cracking on the bulkheads. We also have a few issues to overcome. Davy has a broken hand! We've had to hire in some help as well as ask our friends to help us paint the bottom of the boat! All in all we got...

In this episode of Barefoot Sail and Dive we actually hit the jackpot! Back in October 2020 we heard about another Mahe 36 that was beached and in a bad condition. We took the trip to the south coast of the Dominican Republic to check it out and try to buy...

In this episode of Barefoot Sail and Dive we start to fibreglass on the starboard keel. Last week we did everything we could to try and get it off. We made the decision to fibreglass it on completely. We take a step forward only to have to take two steps b...

In this week's episode of Barefoot Sail and Dive we find some GROSS BLACK water trapped in our starboard keel. It is super important to investigate any possible damage areas on hurricane damaged boats because you never know what you may find! It was shock...

In this episode of Barefoot Sail and Dive we are going to be creating a reverse mould so we can fibreglass the hole in the boat! We played with a few different ideas before getting here but we are happy to say we have a plan! We have decided to go back t...

In this episode of Barefoot Sail and Dive we go into detail about a MISTAKE we made last time. Or is it a mistake? We used a fairing filler that is not epoxy based. After doing a serious amount of research and a test we still are not sure what to do. Leav...

In this episode of Barefoot Sail and Dive we use the Gelcoat Peeler even more. There are definitely some tricks to using this tool and the more you use it the more you learn how to make it that much more accurate. Changing the blades and giving it a clean ...

In this episode of Barefoot Sail and Dive we get a GAMECHANGING TOOL! This tool makes the work we are doing so much easier and more efficient. the Gelcoat Peeler is a quite expensive tool and we are super thankful to Steven and Janet. They also have some p...