YouTube Videos

We live aboard our antique sailboat, Temptress, where we (Emily and Clark) fix almost everything ourselves. Today's Capable Cruising Guide video is a follow-up from last week, when we talked about adding Lithium to a Lead battery system. This week, we talk...

We live aboard our antique sailboat, Temptress, where we (Emily and Clark) fix almost everything ourselves. Today's Capable Cruising Guide video is all about Lead vs. Lithium Batteries—how they work, how to combine them, and how not to screw it up! This ...

Progress is being made on Arabella every day, but that last time we checked in on what we have done up to now was about two and a half years ago. We felt that a recap of the last couple of years, to see all the work that has been done, would be a really f...

Now that we have all the floors fabricated and the majority installed, there are 4 more very important ones to focus on. The ones that tie the ballast keel to the keel timber. These four floors in the middle of the vessel will hold the bolts that capture...

Rebuilding a historic sailing yacht – Removing the Keel Timber / Bolting the Scarph. Support; http://www.sampsonboat.co.uk/support-tally-ho Become a Patron; http://www.patreon.com/sampsonboatco ----- This episode, I drive the 3000 miles back to Tally H...

We're still waiting on the weather to start warming up but we can still get ourselves as ready as possible for when it does. We start to work with the lumber that will become our deadwood and we shoot a propane tank to help us melt lead into the major div...

After the video of our lead keel pour came out, we received a lot of comments regarding the safety of the pour and about concerns or contamination to the surrounding area. We did our best to get information regarding such issues and went as far as calling...

Need a setup to pour a lead keel? Here's how we set up to pour the 4.5 ton keel for our wooden sailboat build. We are building a 38ft wooden sailboat and needed a solid 9500lbs ballast keel. No easy task! If you haven't seen the video of the pour, you...

We finally poured it! Watching 100 gallons of molten lead drop into a wooden mold is not something you experience every day. In this video we focused more on the pour itself and not on the details of our setup. We will go into that in our next video. If y...

The lead keel is one of the most exciting parts of this build at the moment but it is also the scariest, by far! We have melted down some of the wheel weights and loose lead in order to weigh it, while talking about that, we weigh in on the actual pour. ...

In this video we talk about the lead keel and what it is for as well as show our biggest and best haul of lead yet! If you would like more information about our project and ongoing videos please check out our website http://www.acorntoarabella.com If you w...