YouTube Videos
Finally fixing what’s BUGGED US THE MOST about our boat! – Ep 60
That's a wrap! We complete our final boat project in Year 1 as full time liveaboards sailing the big blue! We're applying non-skid deck paint for the first time in a trickier climate. See how our KiwiGrip application goes in the Caribbean heat during hurr...
Published: Dec 03, 2021
Language: EN
Play Time: 00:00:16:39
OUR 30 FOOT HOME Features & Systems on the Deck of our Tiny Sailboat
Join us for a tour on deck of our 30 foot sailboat, a 1969 sloop-rigged, Australian-made Clansman 30, fibreglass yacht called Mirrool.
Features and Systems
00:00 Introduction
00:45 Cockpit
01:12 Self-Tailing winches
01:28 Fibre (Spectra) Lifelines (for m...
Published: Aug 05, 2021
Language: EN
Play Time: 00:00:29:03
S3 #26 How to fix leaking hatch:skylight DIY boatwork
We have postponed our closet and will start on all the small issues that we have onboard.
We have used sikaflex 295 Uv, that should tolerate the uv from the sun.
Published: Mar 23, 2020
Language: EN
Play Time: 00:00:19:28
S3 #25 CORONA update, the closet and the FAILURE !!
We give you an update on our CORONA situation and then we will continue with the closet. Wr have made the teat around the closet and will start on the doors, but... I fail :(
Published: Mar 16, 2020
Language: EN
Play Time: 00:00:23:24
S3 #24 FAILURE on the shaft !! The new closet and prepare for the first sail DIY boatwork
A big failure on the have beeb seen by one of our subscribers and we will repair that. We have also worked on our closet and get all our boat-stuff down in the boat.
Published: Mar 09, 2020
Language: EN
Play Time: 00:00:15:20
S3 #23 How to remove unwanted sound from propeller -DIY boatwork
We have booked the crane and been on the hard.
The sound that we have from the "engine-area", could be from our new propeller and therefore, we decided to go on there hard.
We grind the edges on the prop... Problem solved :)
Published: Mar 02, 2020
Language: EN
Play Time: 00:00:12:37
S3 #20 DIY boatwork REFLOATING… And issues.
We have finaly water under our keel and can test engine and bow thruster, but there is some small issues that we need to take care of.
Published: Feb 10, 2020
Language: EN
Play Time: 00:00:12:09
S3 #19 DIY boatworkBow thruster and antifouling
The antifouling is applied and the bow thruster will ready with all the electrical... We want to refloat.!!!
Published: Feb 06, 2020
Language: EN
Play Time: 00:00:16:18
S3 #18 DIY boatwork batteries to the bow thruster
We have bought batteries to the bow thruster and will start the installation. The outside hull is washed and we will prepare the antifouling-application.
The new charger: https://sterling-power.com/collections/battery-to-battery-chargers/products/2015-bat...
Published: Jan 27, 2020
Language: EN
Play Time: 00:00:20:42
S3 #11 DIY boatwork fiberglass and cold epoxy
The temperature and weather is getting better and we can laying up fiberglass outside and then continue with our new bow thruster...
Published: Dec 09, 2019
Language: EN
Play Time: 00:00:15:58
S3 #10 DIY boatwork fiberglass and a stupid mistake
We have started to close some of the holes in the bottom, but we get an challenge and could not handle the moisture on the hull due to the low outside temperature.
Published: Dec 01, 2019
Language: EN
Play Time: 00:00:19:26
S3 #8 DIY boatwork shaft and bow thruster (ENG subtitles)
There is applied filler around the thruster tunnel and the shaft is placed.
Published: Nov 24, 2019
Language: DA
Play Time: 00:00:09:21