YouTube Videos

Refitting our Bomar hatches Cheers everyone for watching!! To see more of our videos and subscribe https://www.youtube.com/channel/UCXEjpiYKr-hCbtqwC8RXwtg? To SUPPORT us and our productions become a Patron this helps us fund the making of our videos...

You have seen a lot of our big projects, from the bulwark conversion to mast rebuild but what you don't really see is the little stuff that goes on, usually at the same time. We want to make sure our videos are valuable and also want to get projects done w...

A big thank you to Squarespace for sponsoring this video and making these stories possible. If you’d like to open your own online shop or create a website go to Squarespace.com/wildweroam for 10% of your first purchase. Sewing projects bring me so muc...

This is part 1 of our DIY Countertop Epoxy Build. We used a combination of TableTop Epoxy, High Performance Epoxy and Makerpoxy to come up with the final look.

For too long I've seen people rip the tail off a lobster and throw the rest away. It's wasteful and means their missing out on the best meat. In this first ever installment of "How To DIY Adventure". I'll show you how to properly clean and harvest as much...

We finally get to the stage of starting to paint the deck. For our flat sections we decided to use the Epifanes Two Part Poly-Urethane system. It works great, but is not without its blunders, mostly due to operator error as we further this DIY project. ...

Yet more DIY boat project fun! This week I replaced the two seals in my sailboats S130 saildrive. Installed a manual bilge pump to empty out the bilge and build supports for the washer and the dryer in the forward cabin. 00:00 Intro 00:54 Manual bilge pu...

After many hours of sweat, a few hundred drops of blood, and some tears, Avocet was finally returning to the water after her long boatyard stay, 53 days later. In this video, we wrap up painting by incorporating an unexpected galley item as well as discuss...

In this week's video, I finally get to install Athena's (38 ft sailboat) new rudder. I build the new rudder last year by making a mold from the old rudder and used vacuum infusion to form the new shells. The rudder was then filled with an expanding epoxy f...

After months of fairing and prep work, it's finally time to paint the hull of my sailboat. I'll be using International Perfection Pro. A paint that can be applied by roller (no tipping needed) and will leave an amazing finish. Ava and I have chosen Mediter...

Thanks to Squarespace for sponsoring this video. If you’d like to open your own online shop or create a website go to Squarespace.com/wildweroam for 10% of your first purchase. The boat refit continues with another project, though this one is much easie...

Thanks to Squarespace for sponsoring this video. If you’d like to open your own online shop or create a website go to Squarespace.com/wildweroam for 10% of your first purchase. One of the major lessons we learned about living in tiny spaces during our t...