YouTube Videos

Got a scuff? A scratch? A problem area on your boat that needs fixing, but unsure if you can make the repair with Awlgrip paint? Have no fear, I tested it out so you don't have to! Hopefully someone finds this helpful. Don't miss out on upcoming sailing ...

We finally got all the one part primer scraped off the boat, now let hope we don't run into any more obstacles. We decided to go with Awl Grip 2-part primer and topside paint. The two part paint cures through a chemical reaction so we won't have to wait da...

It was a (very) long 5 months but we completed the LAST piece of our external boat refit by building and installing our new bulwark design, inspired by the Lyle Hess Bristol Channel Cutter's. It was a lot of work, but SO worth it! In this video we share ho...

After many hours of sweat, a few hundred drops of blood, and some tears, Avocet was finally returning to the water after her long boatyard stay, 53 days later. In this video, we wrap up painting by incorporating an unexpected galley item as well as discuss...

The third in our total sailboat refit project revisited, covering the entire re-modelling of the interior, electronics, B&G navigation and complete re-wiring and installation of our new B&G navigation system, autopilot and radar. Topics in this ep...

The second in our total sailboat refit project revisited, covering jobs like deck and topsides, prep and painting... We used Awlcraft 2000 paint from Awlgrip in Snow White and Moon Dust. Then we had the mammoth task of re-stepping the masts. But before tha...

The painters work their magic on the topsides where they repainted the damaged bow. It's all good, and you can't see the join! If you enjoy our videos, please help us to get noticed by SUBSCRIBING, COMMENTING, LIKING and SHARING this video. At last we ca...

Here we go! We've taped off sections of the deck and are working together to roll the awlgrip paint and scatter the GripTex coarse particles on the wet paint. So far so good...!

Spraying the second coat of Awlgrip 545 primer to our custom made Turtle Hatch. The first coat was mixed with 40% reducer to allow for the primer to soak into the pores of the wood. This coat was reduced 20% to allow for a relatively smooth finish and ulti...

Applying our final coat of Awl Grip Topcoat to the Bulwarks. This is our last coat of gloss before we can get started with the Non-Skid.

Help support our videos: https://www.patreon.com/followtheboat Subscribe to our youtube channel here: https://www.youtube.com/subscription_center?add_user=spannerheadz Catch our blog at: http://www.followtheboat.com And get our email updates by subscr...

Jordan seals his fairing projects with Awlgrip 545 primer!