YouTube Videos

We're starting on the interior! At least starting with the pieces of the interior. Steve is milling up the stock that is going to become the bilge bands. These will get installed soon, when we get a new crew in to finish the planking. In the meantime, ...

Getting Victoria early in the project was one of the best decisions we have made. There was so much good material packed in that little vessel, and it seems like she just keeps giving every day. From all the beautiful mahogany in her interior, to the bron...

With the main mast step finished, it's time to make the mizzen mast step. This one is significantly smaller as it will hold a significantly smaller mast and take less of a load. It feels like we're installing a sculpture as integral part of the boat! It's...

The bronze floors are done! It's a great feeling complete them and be able to move on to even more tasks that get us closer to launch. Steve keeps on with fitting the main's mast step, and Alix gets to work on figuring out the reuse of Victoria's spars. Yo...

With wrapping up the bronze floors comes working on the mast step. This wild looking piece is built up out of live oak and black locust and looks more like a sculpture than a structural element in the boat! We also check alignment on Arabella to see if ev...

We finally get to finish up the work on the bronze floors. We had about six sets of frames that needed to go in once we removed the molds. These last sets all needed bronze floors made up for them as we couldn't make those on our first go around. That m...

Building a boat can seem like an incredibly daunting task. One thing that has gotten us through these years is seeing it a lot of little things that need to be done and pieces that need to go together. This episode is very much dedicated to that ideology...

There are a lot of exciting things coming together at the moment. Steve installed the rest of the tie rods, Alix finished the sill for the deckhouse to sit on and we made a mockup of the cockpit! One task completely finished, one setting us up for the de...

Vagabond was an Atkin design "Little Maid of Kent" Schooner http://www.atkinboatplans.com/Sail/LittleMaidOfKent.html The journal found me 7 years ago and I held onto it in hope the owner would one day return. Little did I know, Garrett and I would build a ...

Now that we have all the floors fabricated and the majority installed, there are 4 more very important ones to focus on. The ones that tie the ballast keel to the keel timber. These four floors in the middle of the vessel will hold the bolts that capture...

The prep is over with and it is finally time to install the bronze floors! We have invested so much time, energy and money in these and it is such a gratifying feeling to finally see them put in place. In the end, the installation went very smoothly and ...

As we steam in Arabella's frames we have now reached the aft section of the build and need to cut the rabbet up the sides of the stern posts to determine where our frame sockets should land. Once cut we spend a day steaming in frames with a couple snags a...