YouTube Videos

It's time to anti-foul the bottom of the boat, but first some sanding is required! This is the result. Next step is bottom painting

It's time to anti-foul the bottom of the boat, but first some sanding is required!

It's time to anti-foul the bottom of the boat, but first some sanding is required!

Special thanks to Skillshare for sponsoring this video. The first 1,000 people to use this link will get a 1 month free trial of Skillshare: https://skl.sh/sailingjibsea10211 We'll never forget the first time we painted the bottom of our boat! We paint t...

In today's Living Hakuna vlog, we're finishing up all the work in the boatyard and start cleaning and preparing to go back in the water. After 7 long days of the World's Toughest boat Jobs and sweating like never before we reach the end and we are happy wi...

Ask any cruisers out there, antifouling is NOT a fun job and cleaning your hull every week while on anchor can be a real pain (a friend of ours actually ended up with a small crab in his ear while doing it). One dirty secret of the boating industry is ...

Pressure washing helped, but it's time to get to work with some sanders, scrapers, paint stripper, oh and we even try an air compressor and soda blaster (lol).

All of our sailboat repair and maintenance blogs are now hosted on our dedicated maintenance channel, MOTHERSHIP MAINTENANCE Check it out here: https://www.youtube.com/c/mothershipmaintenance An edited version of this video is now hosted there. Although ...

After 72 days on the hard stand, Nandji is ready to float again!!!! Will everything work??? https://www.sailingnandji.com/ In this episode of Sailing Nandji, the final task of boatyard boatwork gets done as we sand back and re antifoul the hull of Nandji....

Eco-friendly antifouling Q&A with Capt. Brian and Senor Brady. We sit down and discuss the results of our eco-friendly antifouling experiment. Brian starts off with a little recap of what we did during our haul out in Grenada, and why we made the dec...

Ever wondered how to paint the bottom of a sailboat with antifouling?? After 5 weeks of back breaking work we’re on the home stretch. We start off by sandblasting Delos’s bottom to take her back to the gel coat. After applying 3 coats of epoxy primer...

Hauled out primarily to remove antifoul that was too expensive to do in USA. Also change fridge keel cooling system from Isotherm to Frigoboat; removed varnish and much much more. s/v Cloudy Bay (Hallberg-Rassy 54) is out the water again, to complete the ...